EM6K34T2CR Discrete Semiconductor Products |
|
Allicdata Part #: | EM6K34T2CRTR-ND |
Manufacturer Part#: |
EM6K34T2CR |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ROHM Semiconductor |
Short Description: | MOSFET 2N-CH 50V 0.2A EMT6 |
More Detail: | Mosfet Array 2 N-Channel (Dual) 50V 200mA 120mW Su... |
DataSheet: | EM6K34T2CR Datasheet/PDF |
Quantity: | 64000 |
Specifications
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
FET Type: | 2 N-Channel (Dual) |
FET Feature: | Logic Level Gate, 0.9V Drive |
Drain to Source Voltage (Vdss): | 50V |
Current - Continuous Drain (Id) @ 25°C: | 200mA |
Rds On (Max) @ Id, Vgs: | 2.2 Ohm @ 200mA, 4.5V |
Vgs(th) (Max) @ Id: | 800mV @ 1mA |
Gate Charge (Qg) (Max) @ Vgs: | -- |
Input Capacitance (Ciss) (Max) @ Vds: | 26pF @ 10V |
Power - Max: | 120mW |
Operating Temperature: | 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | SOT-563, SOT-666 |
Supplier Device Package: | EMT6 |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
The EM6K34T2CR is an array of Field Effect Transistors (FETs) designed for use in electronic switching applications. This device consists of two N-channel FETs, one NPN transistor, and two diodes, each of which are mounted in a TO-254 package with a single gate connection. The gate can be either a 0 volts DC (Vdc) bipolar or a 5 volts DC (Vdc) DC offset. This device is manufactured by STMicroelectronics and is available in various configurations such as through-hole and surface mount. The EM6K34T2CR is part of STMicroelectronics\' family of FET arrays and is designed for applications such as switching, amplifying, measuring, and controlling circuits.Applications of EM6K34T2CR
The EM6K34T2CR is most commonly used in switching applications, where it is used to control the flow of an electric circuit. It is also used in low-power control circuits where its high gain makes it an ideal choice. The EM6K34T2CR can also be used in amplifying, measuring and controlling circuits, providing higher functionality than other FET arrays. For example, in an audio amplifier the EM6K34T2CR array can be used to switch the output of the amplifier into either the low or high impedance position, allowing the amplifier to produce different sound levels depending on the position of the switch. Similarly, in an electric motor, the EM6K34T2CR can be used to measure the current through the motor and will turn the motor off if the current is too high. The EM6K34T2CR can also be used in robotics, where it provides a relatively low voltage and current to actuate the robot’s movements. This makes the EM6K34T2CR an ideal choice for robotics, as it offers a low power consumption and a small form factor.Working Principle of EM6K34T2CR
The EM6K34T2CR works on the principle of voltage-controlled FETs. The FETs are operated when the gate voltage is greater than the source voltage. In the EM6K34T2CR, the FETs are operated by switching the gate voltage between a 0V bias voltage and 5V DC offset. The N-channel FETs are operated by switching the gate voltage between a 0V bias voltage and 5V DC offset. If the gate voltage is increased above 5V then the N-channel FETs will be open and will allow current to pass through. If the gate voltage is decreased to below 0V then the N-channel FETs will be closed and will not allow current to pass through. The NPN transistor in the EM6K34T2CR provides an amplified output. This amplified output is used as an alternate source for the gate voltage, allowing the FETs to be operated in the same manner regardless of the voltage supplied to the gate. The two diodes are protection diodes that are used to protect the device from over-voltage.Conclusion
The EM6K34T2CR is an array of FETs designed for use in electronic switching applications. This device is manufactured by STMicroelectronics and is available in various configurations such as through-hole and surface mount. The EM6K34T2CR is most commonly used in switching applications where it is used to control the flow of an electric circuit. It is also used in low-power control circuits, where its high gain makes it an ideal choice. The EM6K34T2CR works on the principle of voltage-controlled FETs, and the NPN transistor in the EM6K34T2CR provides an amplified output. The EM6K34T2CR is a reliable and robust device that can be used in a variety of applications.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "EM6K" Included word is 7
Part Number | Manufacturer | Price | Quantity | Description |
---|
EM6K33T2R | ROHM Semicon... | -- | 1000 | MOSFET 2N-CH 50V 0.2A EMT... |
EM6K1T2R | ROHM Semicon... | -- | 40000 | MOSFET 2N-CH 30V .1A EMT6... |
EM6K34T2CR | ROHM Semicon... | -- | 64000 | MOSFET 2N-CH 50V 0.2A EMT... |
EM6K7T2R | ROHM Semicon... | -- | 1000 | MOSFET 2N-CH 20V 0.2A EMT... |
EM6K31T2R | ROHM Semicon... | -- | 1000 | MOSFET 2N-CH 60V 0.25A EM... |
EM6K6T2R | ROHM Semicon... | -- | 1000 | MOSFET 2N-CH 20V 0.3A EMT... |
EM6K31GT2R | ROHM Semicon... | 0.06 $ | 1000 | MOSFET 2N-CH 60V 0.25A EM... |
Latest Products
AO4822L_101
MOSFET 2N-CH 30V 8AMosfet Array 2 N-Chan...
SI5944DU-T1-GE3
MOSFET 2N-CH 40V 6A 8PWRPAKMosfet Array ...
SI4973DY-T1-GE3
MOSFET 2P-CH 30V 5.8A 8SOICMosfet Array ...
NTMD6601NR2G
MOSFET 2N-CH 80V 1.1A 8SOICMosfet Array ...
BUK7K6R2-40E/CX
MOSFET 2N-CH 56LFPAKMosfet Array
PHN210,118
MOSFET 2N-CH 30V 8SOICMosfet Array 2 N-C...