EPAG421ELL270MJ35S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are electrical components that are capable of storing electrical energy even after they are disconnected from their source. A capacitor is essentially an electric charge storage device comprising at least two conductive plates separated by an insulating medium, typically called the dielectric. In Aluminum Electrolytic Capacitors, the two plates are an aluminum foil element with a thin oxide film, and a wetted separator. The foil element itself acts as the anode, and the wetted separator acts as the cathode. The oxide layer helps to keep the electrical charge stored.

The EPAG421ELL270MJ35S is a type of Aluminum Electrolytic Capacitor with a rated voltage of 10 V DC, and a capacity of 3.3 µF. This device comes with a surface mount package and is reverse polarity protected. It also has a rated ripple current of 2 A (120 Hz at 85°C). The device can withstand a temperature up to 85°C and has a shelf life of three years.

The main application of Aluminum Electrolytic Capacitors is for challenging and high-power energy storage requirements. In many circuits, such capacitor can be used as a filter capacitor to reduce electrical noise, or to minimize glitches. They are also frequently used as energy back-up in microprocessor-based equipment, DC-to-DC converters, line-powered circuits, defibrillators, and engine control systems. Moreover, these capacitors are often used to bridge or buff the input supply of a circuit, and provide temporary current for transient loads.

The working principle of an Aluminum Electrolytic Capacitor is fairly simple. When a voltage is applied, the foil electrodes within the capacitor become charged, and create an electric field between them. This electric field is affected by the insulating medium inside the capacitor, causing ions from the medium to migrate and build up one of the plates. As the ions accumulate, an electric charge builds up. When the applied voltage is removed, the stored electrical charge at the plates is still there, although it will slowly decrease over time.

Overall, EPAG421ELL270MJ35S is an Aluminum Electrolytic Capacitor with 10 V DC and 3.3 µF rated voltage and capacity, respectively. It is designed for high-power energy storage requirements, and is often used as a filter capacitor, a backup supply, and in other transient load circuits. The capacitor works by forming an electric field between the two foil electrodes when a voltage is applied, causing ions to accumulate and a charge to build up on one of the plates.

The specific data is subject to PDF, and the above content is for reference