EVAL-AD5433EBZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Evaluation boards, such as the EVAL-AD5433EBZ, are used to evaluate digital-to-analog converters (DACs) from Analog Devices. These boards are designed to provide a platform to evaluate the performance of the device under evaluation through testing, validation, and application.

The EVAL-AD5433EBZ is an evaluation board for the AD5433/5437, a series of single, dual, and quad, 10-bit, ultra-low power, buffered, voltage output, digital-to-analog converters (DACs) from Analog Devices. It features onboard reference voltage, input switches, output enable (OE) switch, SPI interface, voltage output, and other components to reduce the need for external components.

The AD5433/5437 DACs integrate high-bandwidth 4-channel amplifiers with a voltage output range of 625 mV to 3.75 V. The integrated amplifiers can drive up to 500 Ω loads while providing a wide signal bandwidth from 18 MHz at 10 mV output. In addition, the devices offer fast settling times as low as 2 μs and short cycle times as low as 4 μs in buffered mode. The EVAL-AD5433EBZ board features an onboard voltage reference selection and SPI configuration options to evaluate the performance of the device.

The working principle of the EVAL-AD5433EBZ board is straightforward. The DACs are designed to provide a voltage output in response to an input digital code. The board provides 10-bit resolution, with the resolution increasing exponentially with each bit. The input digital code is converted by the DAC into a corresponding voltage output. The onboard reference voltage selector determines the reference voltage against which this output is compared. Additionally, the board also features an output enable (OE) switch which is used to disable the output stage so that the evaluation of the device can be done without an external load.

The EVAL-AD5433EBZ board is an ideal platform to evaluate the performance of the AD5433/5437 DACs. The board can be used to perform various types of tests and measurements. For instance, it can be used to measure the settling time, DC parameters such as output offset, gain error, and integral nonlinearity, and AC parameters such as signal-to-noise ratio, signal-to-noise-and-distortion ratio (SNDR), harmonic distortion, rise time, and more. Additionally, the board is also suitable for design validation. It can be used to validate the correctness of the SPI interface, verify the operation of the onboard reference, and evaluate the performance of the DACs under different conditions.

In conclusion, the EVAL-AD5433EBZ is an evaluation board that allows designers to test and validate the performance of the AD5433/5437 DACs from Analog Devices. The onboard components on the board enable evaluation of the performance of the device and provides a simple and effective platform to design and validate applications using the DACs.

The specific data is subject to PDF, and the above content is for reference