EVAL-AD7671CBZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADCs) are devices used to convert analog signals into digital signals for further processing by digital systems. The EVAL-AD7671CBZ evaluation board, designed by Analog Devices, is a low power, wideband, 14-bit, single-channel ADC designed to operate with supply voltages as low as 1.7 V and to convert a maximum 4 MHz input signal bandwidth. The EVAL-AD7671CBZ board is optimized for use in applications such as communications, instrumentation, ultrasound imaging, and data acquisition.

The EVAL-AD7671CBZ evaluation board is based on the on-chip, fully differential sample-and-hold (S/H) input amplifier, which has a bandwidth of at least 270 kHz and enabling low distortion and wide dynamic range. Furthermore, the board features an I2C interface to enable register reads and writes for customizing the device to specific applications. The board also includes a voltage reference, reference buffer, and reference decoupling capacitors.

The EVAL-AD7671CBZ evaluation board has an on-board ultra-low-noise 3.3V or 5V power supply, which provides a nominal power supply voltage of 3.3V or 5V respectively. The board also has an on-board 30MHz clock to provide a clock reference signal to the ADC. Additionally, the EVAL-AD7671CBZ comes with an a 2-bit digital pulse code modulation (PCM) output for post-processing, as well as an analog output operation mode for easy system integration.

The EVAL-AD7671CBZ evaluation board supports a range of signal processing functions, including gain adjustment, offset adjustment, and digital filter functions. It is powered by a 5V supply, with a maximum current consumption of 90mA. The board also features a user-programmable low-pass filter and 12-bit analog-to-digital conversion.

The EVAL-AD7671CBZ evaluation board is designed to operate in a wide range of environmental conditions, with a temperature range of -30 to +85 ºC and operating humidity ranging from 40% to 85%. The board also features protection against over-voltage and over-current conditions, which enables it to operate reliably in harsh conditions. In addition, the board can be transformed into an out-of-the-box programmable solution with the addition of a microprocessor, programming kit, and appropriate code.

Overall, the EVAL-AD7671CBZ evaluation board is an advanced, low-power ADC suitable for a wide range of applications such as communications, instrumentation, data acquisition, and ultrasound imaging. The board comes with a wide range of features, including an on-board voltage reference, I2C interface, voltage reference buffer, reference decoupling capacitors, ultra-low noise on-board power supply, 30MHz clock, a 2-bit digital PCM output, and an analog output operation mode. It is powered by a 5V supply, with a maximum current consumption of 90mA.

The specific data is subject to PDF, and the above content is for reference