FODM3023V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices used to provide electrical isolation of signals between two circuits. They are commonly used in applications such as medical and industrial instrumentation, as well as in telecommunications and power supplies. The FODM3023V is an optoisolator, classified as an optically coupled Triac and SCR Output. It is an isolator designed to provide electrical isolation between low voltage control circuits and higher voltage motor control and/or process control circuits.

The FODM3023V optoisolator is specifically designed for applications in which the controlling voltage is 3 to 30 VDC, such as DC servomotors, DC contactors, AC contactors, load switches, stepper motors, and inductive loads. It is useful for controlling the on/off operation of resistive, inductive and capacitive loads. The device has a high dielectric strength, which makes it suitable for applications where noise suppression is essential. Its isolated output has a maximum peak current of 3mA, a maximum load current of 2.2A and a maximum on-state voltage of 400V.

The FODM3023V is an optoisolator that uses a Light Emitting Diode (LED) and a phototriac. The LED is used to generate light which is transmitted across a gap between the LED and the phototriac. This light is then absorbed by the phototriac, causing it to switch on. When the phototriac is in its on state, a current is allowed to flow between its input and output terminals, thus providing electrical isolation between the two sides. The LED and the phototriac are both protected from static electricity and other transient voltages by the built-in photodiode.

The FODM3023V can be used in a variety of applications, such as medical instruments, industrial instruments, and telecommunications. It is useful in controlling the on/off operation of resistive, inductive, and capacitive loads without compromising electrical isolation between the controlling and controlled circuits. Its high dielectric strength makes it a suitable choice for applications where noise suppression is necessary.

The FODM3023V optoisolator is a versatile device that can be used in a variety of applications. Its ability to provide electrical isolation between low voltages and higher voltages makes it ideal for motor, process, and power supply control. Its high dielectric strength makes it suitable for applications that require noise suppression. It is easy to install and can be used with a variety of control circuits. Overall, the FODM3023V optoisolator is an excellent choice for isolating signals between two circuits.

The specific data is subject to PDF, and the above content is for reference