FODM3052R2-NF098

Current - On State (It (RMS)) (Max):	70mA
Approvals:	cUR, UR
Supplier Device Package:	4-Mini-Flat
Package / Case:	4-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 100°C
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.2V
Turn On Time:	--
Current - Hold (Ih):	300µA (Typ)
Series:	--
Current - LED Trigger (Ift) (Max):	10mA
Static dV/dt (Min):	1kV/µs
Voltage - Off State:	600V
Voltage - Isolation:	3750Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR OutputOptoisolators are a type of electronic component used for galvanic isolation of two circuits electrically. They employ the optical transmission of electrical signals between two components, eliminating the need for direct electrical contact between the two. The FODM3052R2-NF098 is an example of an optoisolator that uses a Triac or SCR (Silicon Controlled Rectifier) output.The FODM3052R2-NF098 optoisolator consists of an LED (light-emitting diode) and a Triac or SCR device. The LED is powered by a controlling voltage, usually around 10V. When this voltage is applied to the LED, it emits light which is then transmitted through an optical barrier, such as a metal or plastic sheet, to the Triac or SCR. The light is then absorbed, triggering the Triac or SCR into conduction.The FODM3052R2-NF098 optoisolator’s main applications include current and voltage sensing, signal switching, and pulse/signal conditioning. The optoisolator can be used to sense and control both AC and DC signals. In AC signal sensing applications, the optoisolator can be used to detect a signal’s peak, trough, or zero-crossing. In DC voltage sensing applications, the optoisolator can be used to detect the change in the DC signal whenever it reaches a preset level. In signal switching applications, the optoisolator can be used to switch signals on or off. This is done by varying the controlling voltage to the LED, allowing the optoisolator to turn the signal on or off as needed.In pulse or signal conditioning applications, the FODM3052R2-NF098 optoisolator can be used to filter out high frequency signals or to detect pulse widths. The optical barrier, due to its electrical insulation, allows for extremely high levels of galvanic isolation while providing fast response times. The optoisolator is also able to withstand high levels of voltage and temperature variations, making it suitable for a wide variety of applications.The FODM3052R2-NF098 optoisolator is available in a variety of package types and sizes, including a 9-pin DIP, SMD, DIP-style or SMD-style, and a 9-pin exposed-lead with base mount. No externally applied power is required for the optoisolator to function, making it an ideal choice for applications that require low-power operation.The FODM3052R2-NF098 optoisolator can be used in a wide variety of applications, from industrial process control and automation to consumer appliances. They can be used to control AC and DC signals, to detect peak and zero-crossing points, to filter out high frequency signals or to detect pulse widths. The optoisolator’s galvanic isolation and fast response times make it a highly convenient and cost-effective choice for these applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description