GBL005-E3/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices used to allow the current to flow in one direction and prevent it from flowing in the reverse direction. Bridge rectifiers are circuits that use four diodes to rectify alternating current (AC) to direct current (DC). The GBL005-E3/5 is a bridge rectifier designed for AC mains applications with a maximum voltage of 51V.The main application for the GBL005-E3/5 is in power supplies and charger designs where a DC voltage is required at the input stage. A bridge rectifier is a non-polarized voltage converter and can be used to supply current to a load in both directions leaving the load insensitive to changes in the input voltage polarity. The two most common applications of bridge rectifiers are as full wave rectifiers and as voltage multipliers such as the voltage doubler or tripler. The GBL005-E3/5 is a four-terminal bridge rectifier with an isolation rating of 300Vrms. The bridge rectifier features a high current rating of 5A and a maximum reverse voltage of 51V. The MOSFET-based bridge rectifier offers a low forward voltage drop of 1V max, a flat reverse recovery characteristic, low leakage current, low reverse current and low thermal resistance.The GBL005-E3/5 is designed for use in a wide range of AC voltage applications. The bridge rectifier offers an operating temperature range from -40°C to +105°C, allowing for operation in both commercial and automotive environments. The bridge rectifier also features surge immunity up to 8kV and an ESD tolerance of 2kV.The GBL005-E3/5 bridge rectifier uses four diodes dynamically connected in a bridge configuration in order to form a full wave rectifier. When the AC voltage is applied to the diode bridge, a full wave rectified sine wave output is generated. The output is a pulsed DC wave as the diodes are alternately turned on and off as the AC voltage alternates in timing and amplitude.The bridge rectifier also uses a control terminal which allows the user to control the rectified output waveform. By changing the control signal, the bridge rectifier can be used to generate either a full wave rectified sine wave or a square wave output. The control terminal also allows for the reduction of rectified output waveform distortion, allowing for more precise control over the output waveform.The GBL005-E3/5 is designed for use in a wide range of applications such as power supplies, AC/DC converters, switching power supplies, battery chargers, telecom systems, automotive applications, and digital electronics. The bridge rectifier provides reliable performance, low power dissipation, and high efficiency, making it an ideal choice for energy-efficient designs. Its high surge current capability also makes it ideal for use in applications where the power supply is subject to frequent or high-voltage transients. In summary, the GBL005-E3/5 Bridge Rectifier is an ideal solution for AC voltage applications where a DC voltage is required. It offers a wide operating temperature range, low forward voltage drop, high surge current capability, and excellent isolation characteristics. The bridge rectifier allows for precise control of the rectified output waveform, making it ideal for applications that require strict regulation of the power supply.

The specific data is subject to PDF, and the above content is for reference