GBL02-M3/51

Series:	--
Packaging:	Tray
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	4A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 4A
Current - Reverse Leakage @ Vr:	5µA @ 200V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GBL
Supplier Device Package:	GBL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The GBL02-M3/51 is a type of Bridge Rectifier, a commonly used device in both industrial and consumer applications. Bridge rectifiers provide a low-cost, cost effective solution to converting AC to DC power. In this article, we’ll look at the application fields of Bridge Rectifier and its working principles.

Application Fields

Bridge Rectifiers have a wide range of applications across many industries. They are the most commonly used device in low-voltage applications, such as switchmode power supplies and 12V lighting systems. They can also be used in more specialist applications such as AC to DC motor drives. These rectifiers act as high-speed switches, allowing for smooth switching between AC and DC power with very low voltage or current losses. Another major application area for bridge rectifiers is in welding equipment. A bridge rectifier is used to convert AC to DC power, allowing the rectifier to be used for constant current control. This makes the rectifier ideal for welding and arc welding applications.

Working Principle

The GBL02-M3/51 is a bridge rectifier which works on a three-phase diode bridge. It consists of four diodes arranged in a bridge circuit. When an alternating current source is connected to the bridge, the bridge circuit reverses its polarity every half cycle of voltage, allowing the current to flow through the load in only one direction.The Bridge Rectifier works on the principle of the reverse polarity of each diode. When the load is connected to the AC source, each of the four diodes conducts on alternate half cycles of the AC voltage, to allow the current to flow in only one direction. The GBL02-M3/51 bridge rectifier is a full-wave rectifier. It has higher output voltage, is more efficient and is more cost effective than a half raft rectifier. It also has a better power factor and can be used in high power applications due to its low voltage drops.

Conclusion

The GBL02-M3/51 is a bridge rectifier, a device commonly used to convert AC to DC power. Bridge Rectifiers have a wide range of applications and can be used in a variety of industrial, consumer and special applications. The working principles of the GBL02-M3/51 are based on a simple three-phase diode bridge, which consists of four diodes arranged in a bridge circuit. This allows for the reverse of the polarity of each diode every half-cycle of voltage, and thus the conversion from AC to DC current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description