H11A1-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of electronic circuit component, designed to provide electrical isolation between two signals while translating a signal between two different voltage levels. Optoisolators are commonly known as optical couplers, opto-isolators or opto-couplers. The H11A1-V optoisolator is a transistor, photovoltaic output type optoisolator. It is typically used for signal isolation, voltage level shifting and protection applications.

Unlike regular electrical components, optoisolators use an external power source, such as a light emitting diode (LED), to power the switching circuit. The LED is connected to one side of the circuit, and the other side is connected to a phototransistor. The two sides are said to be electrically isolated. When the LED emits light, it causes the phototransistor to conduct, allowing current to flow. When the LED is not active, the phototransistor is effectively off, and no current flows.

The H11A1-V optoisolator, like most optoisolators, is built with a 4-pin design, two pins connected externally and two pins connected internally. The external pins are the LED and phototransistor pins, which are connected to the circuit’s external power source. The internal pins are connected to the switching circuit, allowing current to flow when the phototransistor is activated.

The H11A1-V is designed to provide galvanic isolation, which is the separation of two circuits from one another so that they do not influence each other. This type of isolation is particularly important in signal and voltage sensitive circuits. The H11A1-V is also designed to provide voltage level shifting, allowing a signal to be translated from one voltage level to another. This is particularly important for microcontroller-based systems, as many microcontrollers operate on different voltage levels than other devices.

The H11A1-V is also designed to protect against inverse voltages, such as those generated by electrostatic discharges. In this application, light from the LED activates the phototransistor, allowing current to flow to ground. The current is then diverted from the protected components, thereby preventing damage. The H11A1-V optoisolator is also designed to protect against voltage overdrive, which can cause damage to components.

The H11A1-V optoisolator is a versatile device that can be used in a wide variety of applications. It is ideal for signal isolation, voltage level shifting and protection against overvoltage and inverse voltages. With its 4-pin design, the H11A1-V is a reliable and cost-effective solution for many circuit protection and translation applications.

The specific data is subject to PDF, and the above content is for reference