H11A2S(TA)-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that provide electrical isolation between two circuits. They are typically used in applications that require the prevention of electrical noise from interfering with sensitive signals. The H11A2S(TA)-V is a type of optoisolator that utilizes a transistor and photovoltaic output. This article will provide an overview of the application field and working principle of the H11A2S(TA)-V optoisolator.

Application Field

The H11A2S(TA)-V optoisolator is used in a wide range of applications, from industrial control to telecommunications. The main purpose of the device is to electrically isolate one circuit from another while allowing data to still be exchanged. It is usually used in applications that require signal isolation between circuits, such as between a control system and a data acquisition system. It can also be used to protect a circuit from electrical interference, such as that produced by power line transients.

The H11A2S(TA)-V optoisolator is especially well-suited for use in applications that require high reliability and safety. It is UL approved for use in Class I, Division 2 hazardous locations and can be used in applications with hazardous voltages up to 1500 Volts AC/300 Volts DC. The device is also able to withstand temperatures of up to 95°C and can provide up to 5000Vrms of isolation.

Working Principle

The H11A2S(TA)-V optoisolator consists of two main components: a photovoltaic cell and a transistor output stage. The photovoltaic cell is a semiconductor device that converts light energy into electrical energy. When current is applied to the photovoltaic cell, it generates a voltage across the cell that is proportional to the current. This voltage is then applied to the base of an NPN transistor, which then drives the output stage.

The output stage of the H11A2S(TA)-V optoisolator consists of two transistors: an NPN transistor and an PNP transistor. The NPN transistor is used as a current amplifier, while the PNP transistor is used as an inverter. The NPN transistor amplifies the voltage generated by the photovoltaic cell and drives the output of the optoisolator. The PNP transistor is connected in reverse to the NPN transistor and inverts the output signal. This allows the optoisolator to provide electrical isolation between two circuits while still allowing data to be exchanged.

In summary, the H11A2S(TA)-V optoisolator is a type of electrical device used to provide isolation and data transfer between two circuits. It uses a photovoltaic cell and two transistors to create a voltage differential that can be used to drive the output of the device. The device is UL approved for use in hazardous locations and is able to withstand temperatures of up to 95°C. It is commonly used in applications that require signal isolation and power line protection.

The specific data is subject to PDF, and the above content is for reference