H11A4S(TA)-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used for isolating electrical components from each other. Specifically, an optoisolator consists of a transmitter component on one side and a receiver component on the other. The transmitter side produces an electrical signal, which is then used to trigger the receiver side. In the case of an optoisolator with a transistor, photovoltaic output, the transmitter side consists of a light emitting diode (LED) that emits a light signal. This light signal is then picked up by the photovoltaic cell on the receiver side, which converts it into electrical energy, triggering the transistor. The H11A4S(TA)-V optoisolator is a type of optoisolator with a transistor, photovoltaic output. It consists of an infrared emitting diode (IRED), which produces light in the infrared spectrum, and a coupler IC housed in a 6-pin UL 94V-0 plastic package. The IRED is powered by a current of up to 30mA, and the output of the photovoltaic cell is connected to the input of the transistor.The H11A4S(TA)-V optoisolator is most commonly used in industrial and automotive applications. It is designed to provide isolation between low voltage circuits and high voltage circuits, allowing the low voltage circuit to communicate with and trigger the high voltage circuit. This makes it ideal for applications such as motor speed control, data transmission between two circuits, and switch control.The H11A4S(TA)-V optoisolator is designed to operate over a wide temperature range, from -40°C to +105°C. It has a high isolation voltage of 3500Vrms, a high speed response time, and a high surge current capability of up to 1A. In addition, the H11A4S(TA)-V optoisolator has low power consumption and low input current, making it ideal for use in battery-powered applications.The H11A4S(TA)-V optoisolator\'s working principle is relatively straightforward. When the IRED is switched on, it produces a light signal which is detected by the photovoltaic cell. This then sends an electrical pulse to the transistor which triggers the output. When the IRED is switched off, the photovoltaic cell stops generating an electrical pulse, and the transistor turns off, stopping the output. Overall, the H11A4S(TA)-V optoisolator is an ideal choice for a wide range of applications. It is capable of providing up to 3500Vrms of isolation, has a high speed response time, can operate over a wide temperature range, and has low power consumption and low input current. It is the perfect choice for industrial and automotive applications such as motor speed control, data transmission between two circuits, and switch control.

The specific data is subject to PDF, and the above content is for reference