H5BBT-10102-A7

Jumper Wires

Jumper wires are wires that have been pre-cut and pre-stripped into specific lengths and connector configurations. Typically, they are available in either single-wire or multi-wire configurations, and in various colors. In some applications, they can be used as a direct connection to enhance the electronic performance of a circuit or wire a prototype. Each wire generally has two connector ends that can be used to join multiple devices, circuits, or components.

Pre-Crimped Leads

Pre-crimped leads are flexible wires that come in a variety of configurations and are often used in electrical and electronic applications. Pre-crimped leads are designed to join two components or devices, usually through an electrical connection that can then be connected to a circuit. These leads are often used in the automotive industry to reduce the installation time of electrical devices or components. Typically the leads are pre-crimped at the ends giving them a secure connection, meaning they can be quickly and easily installed.

H5BBT-10102-A7 Application Field and Working Principle

The H5BBT-10102-A7 is a jumper wire that has a pre-crimped lead designed for use in a wide variety of electronic and electrical applications. It is a single-wire configuration with a black insulated jacket, and is 80cm in length. This pre-crimped wire is designed to offer reliable connections and is suitable for applications with high electrical load in a water-protected environment. The wire is made of stranded copper conductor which ensures good contact performance and a better electrical performance. The wire’s insulation keeps it resistant to water, oil, and other common liquids, making it suitable for moist and garden environments.

The H5BBT-10102-A7 is used in automotive, communication, electronic, and other industries as a jumper wire. This type of pre-crimped lead is often used to make connections between components and devices without the need of extra wiring. It is used for routing wires, joining circuits, or providing power to components. It can also be used in automotive electronics, such as for engine starters, fuel pumps, and other automotive start-ups.

The H5BBT-10102-A7 uses a crimp connector to secure and connect the two ends of the jumper wire. The crimp connector is made of two parts, an inner conductor and an outer sleeve. The inner conductor has two ends that securely grip the wire and form a strong connection with the outer sleeve. This connection reduces resistance and ensures good electrical contact with the conductor. The outer sleeve provides additional strain relief and prevents the wire from slipping from the connector. The crimp connector also provides protection against corrosion and water damage, making it suitable for both indoor and outdoor applications.