H5BBT-10112-R9

Jumper Wires

Jumper wires are short lengths of insulated wire with lugs, connectors, or pins at each end, allowing components in an electronic circuit to be connected without soldering. They are usually available in predefined lengths and colors for specific applications.

In voltage and current limited electronic circuits, jumper wires are mainly used to reroute signals, facilitate testing, debugging, and to create short circuits. In more direct current circuits, such as automotive wiring, they are typically used to make temporary repairs and modifications such as bypassing a defective component.They are typically sold wrapped in spools but can also be sold precut and labeled according to length.

Pre-Crimped Leads

Pre-Crimped Leads are versions of jumper wires that have a pre-crimped pin or lug at one or both ends. They are often sold with a connector, such as a female or male header, attached at one end, allowing them to be connected to a printed circuit board. The leads are usually color-coded and insulated to provide positive identification.

Pre-crimped leads come in various lengths and wire gauges, depending on their application and are suitable for a variety of electronic projects. The pre-crimped leads are simple to use and can save time when compared to creating a custom wire harness. They are usually used in applications where specific connections need to be made quickly and are often used to connect components within an enclosure.

H5BBT-10112-R9 Application Field and Working Principle

The H5BBT-10112-R9 is a pre-crimped lead used for connecting components in an electronic circuit. It features a 12-pin female header connector at one end and two 2-pin male header connectors at the other end, each cable section strained to ensure optimal strain relief. The insulated lead is constructed from 16 AWG wire and tinned copper alloy and comes in a 9-foot length.

The H5BBT-10112-R9 is ideal for use in automotive electronics applications, such as sensor systems, engine controllers, and power systems. It is also suitable for regulated DC circuits for use in industrial control systems, audio systems, or any electronic circuit where reliable and secure connections must be established quickly. Depending on the application, the leads can be used as jumper wires or pre-crimped leads.

To use the H5BBT-10112-R9 as a jumper wire, simply connect the female header connector of each lead to the appropriate components. For applications where the leads must be pre-crimped, use the male header connectors on each lead to connect to the respective components and then use the appropriate crimping tool to secure them into place. Once installed, the strain relief strain-relieved lugs will secure the wires, preventing them from coming undone or causing short circuits.