H5BBT-10104-W2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires, Pre-Crimped Leads, and H5BBT-10104-W2 Application Field and Working Principle.

Jumper wires are fittings used to make temporary electrical connections. They are very useful in prototyping because they allow electrical signals to be quickly routed from one point to another. The bare wire is connected to wire up circuits and often held in place by plastic or metal clips. They require no tools to use; just slide the wire into the clips and you\'re ready to go. Most jumper wires range from 18 AWG (American Wire Gauge) to 22AWG with the most common being 20AWG.

Typically, jumper wires are found in two forms: insulated wire and uninsulated wire. Insulated wires are covered in a plastic sleeve, which insulates the cable within from outside interference. Uninsulated wires are better for connections where more heat-dissipation is needed, such as high-load applications. These wires are often used when a permanent wiring solution is needed, such as in robotic applications.

Pre-crimped leads are a type of electrical connector consisting of a wire cut to length and crimped into a specific shape. A pre-crimped lead is designed to connect two components of an electrical system without the need for tools. Crimped leads come in a wide variety of sizes and shapes, and can be used in applications ranging from to automotive wiring to HVAC wiring. The process for pre-crimping a lead is simple: wires are cut to the desired length and the appropriate metal connector is crimped onto one end. A special tool is available for this process.

H5BBT-10104-W2 is a type of pre-crimped lead manufactured by Tyco Electronics. It is ideal for high voltage applications such as industrial process control systems. The H5BBT-10104-W2 is rated for up to 1000 volts and can be used with up to four AWG current-carrying conductors. It is constructed of a durable strain relief material that meets UL 94V-0 flame-retardant requirements and has been tested for insulation resistance. The H5BBT-10104-W2 can also be ordered in a variety of lead lengths, colors, and conductor sizes.

The application field and working principle of the H5BBT-10104-W2 pre-crimped lead are as follows: it is used in applications where it is necessary to connect two components that are located more than five centimeters apart. The lead is connected to each component, completing the circuit. The lead must be securely connected to both components so that it will not pull out of the connections. Additionally, the H5BBT-10104-W2 offers protection from electromagnetic interference, which can disrupt electrical signals. Finally, the lead is designed to dissipate heat from the components connected, ensuring a longer life for the components.

The specific data is subject to PDF, and the above content is for reference