HMC773ALC3B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Mixers are widely used in a variety of applications, from pro audio to broadcast, from commercial to consumer, and a variety of other industrial and commercial applications. Among RF Mixers, the HMC773ALC3B, is a low noise, high linearity, optimum linearity mixer that may be used in many radio frequency applications. The application field and working principle of HMC773ALC3B are analyzed in the following.

The HMC773ALC3B is designed to work with both low and high frequency circuits, up to 8.0 GHz. It can be used in RF up- and down-converters as well as modulators. The device provides excellent linearity for baseband signals, providing significantly improved dynamic range. Its low noise figure of 2.1 dB, low distortion, and high intercept point (IP3) of 31 dBm make it suitable for high performance applications such as power amplifiers, receiver matching and selectivity enhancement.

The working principle of the HMC773ALC3B involves the conversion of a modulated signal on a carrier frequency to a new frequency. The signal is input to the device and a low frequency Local Oscillator (LO) is combined with it in the mixer. The mixing process produces sum and difference frequency components, which are shifted to the final output frequency. This process is known as frequency translation or frequency conversion.

In operation, the signal is input to the mixer at the input stage, is mixed with the LO, and the output contains a high frequency IF and a low frequency IF. Depending on the circuit, the high frequency IF will be output, while the low frequency may be by-passed or removed with a filter. The output frequency can then be further amplified, tuned and filtered if necessary.

The HMC773ALC3B is suitable for low power applications such as frequency up- and down-converters and mixers. In addition, the low noise figure, high linearity, low distortion, and high interception point make it suitable for high performance applications such as power amplifiers, receiver matching, and selectivity enhancement. The low noise figure, flat frequency response and very low flicker noise makes it particularly attractive for low power applications.

The HMC773ALC3B is designed to operate over a range of 8.0 GHz. It is also available in a range of configurations, such as 5 x 5 mm4 or 8 x 8mm4. Its low cold swap power consumption makes it suitable for applications such as audio receivers and power amplifiers. Additionally, the device can operate from a 5V power supply and supports a maximum noise figure of 2.1 dB.

In summary, the HMC773ALC3B is a low noise, high linearity, optimally linear mixer suitable for a wide range of radio frequency applications. The low noise figure, flat frequency response and low flicker noise make it ideal for low power applications. The device also supports a maximum noise figure of 2.1 dB and can be used in a variety of configurations, including 5 x 5 mm4 and 8 x 8mm4. Its low cold swap power consumption makes it suitable for use in audio receivers and power amplifiers. Finally, the device is capable of operating from a 5V power supply.

The specific data is subject to PDF, and the above content is for reference