HMHA2801BR2V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of circuit component consisting of an input and output that are isolated from each other. The input is usually a light-emitting diode (LED) and the output is usually a transistor. In the case of the HMHA2801BR2V, the output is specifically a photovoltaic output.

Optoisolators are commonly used in various types of circuits to protect against electromagnetic interference (EMI) and to prevent damage to sensitive or expensive electronics. This isolation can also be used to separate two circuits that have different ground potentials. This type of isolation is particularly important in applications where high voltages and currents are used.

The HMHA2801BR2V is an optoisolator designed to isolate up to 300 volts. It can handle peak currents up to 13A and can provide up to 100ms of isolation. The input side of the device consists of an LED, while the output side consists of a photovoltaic cell.

The HMHA2801BR2V is typically used in applications such as motor control, power control, and power switching. The isolation offered by this device helps to protect sensitive controller circuits from EMI. The photovoltaic output also helps to reduce the amount of power used in the circuit.

The working principle of the HMHA2801BR2V is fairly straightforward. When the LED on the input side is supplied with a voltage, it emits light. This light is then incident on the photovoltaic cell, which produces an electrical charge. This charge is then used to activate the transistor, which in turn controls the power to the connected device.

The optoisolator can also be used to provide a high level of isolation in circuits where a high voltage is present. This is especially beneficial in industrial automotive applications, where a large amount of power is used. The isolation provided by the optoisolator helps to prevent sparks and arcing from occurring due to the high voltages present.

In summary, the HMHA2801BR2V is a type of optoisolator with a photovoltaic output that is designed to provide up to 300V of isolation. It can handle peak currents up to 13A and can provide up to 100ms of isolation. It is typically used for motor control, power control, and power switching applications. The working principle of the device involves emitting light from an LED on the input side, which is then incident on a photovoltaic cell to produce an electrical charge.

The specific data is subject to PDF, and the above content is for reference