IL610-2E

Common Mode Transient Immunity (Min):	15kV/µs
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	3 V ~ 5.5 V
Rise / Fall Time (Typ):	2ns, 2ns
Pulse Width Distortion (Max):	5ns
Propagation Delay tpLH / tpHL (Max):	15ns, 15ns
Data Rate:	100Mbps
Series:	IsoLoop®
Voltage - Isolation:	2500Vrms
Channel Type:	Unidirectional
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Isolated Power:	No
Type:	General Purpose
Technology:	GMR (Giant Magnetoresistive)
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Digital Isolators are electrical devices which are used to transfer digital signals between two isolated circuits and are used in various industrial applications. The IL610-2E is a digital isolator designed for use in circuits with a wide range of applications and needs. This article will discuss the application field and working principle of the IL610-2E.

Application Field

The IL610-2E is ideal for use in industrial applications, including medical, automotive, telecommunications, and other consumer electronics. In these applications, the isolator is used to protect the signal from noise, interference, and overvoltage, ensuring the integrity of the signal. Additionally, the isolator can be used to protect sensitive circuits or control data in applications such as servos control, motor control, and electrical safety. It is also suitable for use in digital data acquisition systems, such as industrial controllers, Programmable Logic Controllers (PLCs), interface cards, sensors, and switches. The IL610-2E has a wide range of input/output compatibility, operating either between 0-5V, 0-10V, or 0-12V, making it suitable for use in most digital data acquisition systems.

Working Principle

The IL610-2E is an opto-isolator, which means it uses light to transfer signals between two circuits. The isolator has a light-emitting diode (LED) and a photodiode, and when an input signal is applied to the leads of the LED, the diode will emit a beam of light. This beam of light is then picked up by the photodiode which generates an electrical signal, which is then passed to the output. The advantage of using an isolator is that it offers reliable signal transfer without the risk of electrical noise or interference. The isolator also ensures isolation between the two signals, meaning the output signal is not affected by changes in the input signal. Additionally, the isolator provides electrical isolation and can handle overvoltage or transients without damage.

Conclusion

The IL610-2E is an opto-isolator designed for use in a wide range of industrial applications. It is capable of providing reliable signal transfer while ensuring electrical isolation, and can also handle overvoltage or transients without damage. Additionally, the IL610-2E has a wide range of input/output compatibility, making it suitable for use in most digital data acquisition systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description