ISL43112IB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface - Analog Switches, Multiplexers, Demultiplexers

The ISL43112IB is an operational amplifier which can be used as an interface component in analog switches, multiplexers and demultiplexers applications. It is a high-performance, dual-channel, low noise amplifier which is very suitable for use in areas where power consumption and noise levels must be kept low. It has a wide range of voltage supply, making it ideal for use in precision analog applications.

The ISL43112IB has two independent amplifier channels which can be used to drive switches in either single-ended or differential configuration. It has an input current limit of 5mA, making it suitable for use in a wide range of applications. The maximum output current of the device is 20mA, making it suitable for driving any type of load. The output voltage range is +4V to -4V and is capable of driving loads as low as 350Ohms. The gain of the device is typically set to unity by externally applied feedback, though it is adjustable between 0.1 and 1000. The ISL43112IB has a low offset voltage of only 10mV, making it highly accurate and suitable for use in precision analog applications. The device is also very versatile, as it can be used to drive switches, multiplexers, or demultiplexers, allowing the user to configure it to fit the application.

The operating principle of the ISL43112IB is based on an internal oscillator circuit. When a switch is to be opened, an input signal is generated on the single-ended or differential input. This input signal acts as an enable signal which activates the oscillator and allows it to supply the output current to the switch. The oscillator runs at its set frequency of 1kHz and provides a constant current to the device, thus supplying the required current to the switch. At the same time, the switch is also being supplied with a varying voltage thereby controlling its level. This configuration allows for precise control over the switch’s current and voltage levels.

The ISL43112IB is very popular for use in precision analog applications, due to its low-power consumption, low offset voltage and wide range of voltage supply. It has two independent channels for driving switches, multiplexers, or demultiplexers and is capable of driving loads as low as 350Ohms. It has a maximum output current of 20mA and a low offset voltage of only 10mV. The gain of the device is adjustable between 0.1 and 1000 and it is very versatile, making it suitable for a wide range of analog applications.

The specific data is subject to PDF, and the above content is for reference