ISL6801AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ISL6801AB is a gate driver which is designed primarily for driving MOSFETs and IGBTs used in power delivery systems. This gate driver employs an input stage combining a fast-acting high current gate driver IC and a high frequency gate resistive output stage. With its built-in logic, the ISL6801AB can be used to interface directly with a variety of different controls and control interfaces, allowing it to be used in a wide range of applications.

The maximum supply voltage of the ISL6801AB is 15V and it has a dead-time of 15nS minimum, which allows for an improved response time. The IC offers protection against failure due to gate or power supply failure, over-current and excess heat. Additionally, it has an output phase leg with an adjustable minimum on time and an adjustable soft-start phase leg with an adjustable off time.

The ISL6801AB has a variety of application fields. One of its main application fields is in Power Factor Correction (PFC) applications. PFC circuits are widely used in AC/DC converter applications to improve the power factor of an AC source, for example an AC mains input. The ISL6801AB is used to control and regulate the switching of the MOSFETs in the PFC circuits, allowing for the improvement of the power factor. Other examples of application fields where the ISL6801AB can be used include switch mode power supplies (SMPS), general-purpose power supplies and automotive power systems.

The working principle of the ISL6801AB is relatively simple. The input stage consists of three inputs, one of which is an enable input and two of which are control inputs. Depending on the logic input level applied to these inputs, the output stage will switch off or on accordingly. The first control input, which is positive-going, will cause the output stage to switch off. The second control input, which is negative-going, will cause the output stage to switch on. The enable input is used for enabling or disabling the device in order for it to be reapplied whenever required.

The output stage is made up of four output channels, each controlled by its own internal logic channel. The logic channel is activated using the enable input and can be used to enable or disable the output channel. The enable input determines which output channel is active. When the enable input is active, it will cause the specified output channel to turn on, while when the enable input is inactive, the output channel will remain disabled. This makes it possible for the output channel to be switched on and off as needed.

The ISL6801AB is a gate driver which is designed to drive MOSFETs and IGBTs in power delivery systems. It features built-in protection features and adjustable soft start capabilities, allowing it to be used in a wide range of applications. Its working principle is relatively simple and allows the device to be used to control and regulate the switching of MOSFETs and IGBTs in different types of power systems.

The specific data is subject to PDF, and the above content is for reference