JANTX1N4117DUR-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components that are used in many electrical and electronic applications. In general, diodes act as two-way valves, allowing current flow in one direction only. The JANTX1N4117DUR-1 is a single Zener diode, so named because it is designed to operate in the Zener region, allowing current to flow in both directions and preventing excessive current flow in either direction. This type of diode is used in many different types of applications, ranging from power conditioning and distribution to test and measurement.

The JANTX1N4117DUR-1 is a silicon-based, junction-mount, low-power Zener diode. It is a two-terminal device, consisting of an anode and a cathode. There is no third lead like that found on the dual Zener diode; instead, the anode and cathode are connected to the Zener regions of the diode. Due to the extremely low voltage and current characteristics of the JANTX1N4117DUR-1, it is usually used as a voltage regulator in systems with operating voltages below 5 volts.

The working principle of the JANTX1N4117DUR-1 is fairly simple. When the anode voltage is less than the breakdown voltage, the diode behaves like an open switch, blocking any current from passing through. Conversely, when the anode voltage reaches its breakdown value, the diode becomes "forward-biased" and current passes through it. This forward bias helps to regulate the voltage levels. The Zener region of the JANTX1N4117DUR-1 allows for current to pass in both directions, which results in the breakdown voltage being maintained regardless of the direction of the current. The breakdown voltage of the diode is 5.2 Volts.

The JANTX1N4117DUR-1 is widely used in low power, low voltage applications. It is sometimes used as a voltage reference, where it is combined with a potentiometer for precise voltage control. It is also commonly used to prevent over-voltage conditions in a variety of systems, and it can be used to provide isolation between two circuits or to protect electronics from a high voltage or current condition. Another common application of the JANTX1N4117DUR-1 is surge suppression, where it is used to limit peak current and voltage in the circuit.

The JANTX1N4117DUR-1 is a versatile and reliable low power Zener diode, which is especially suited for applications where low current and low voltage are the primary concerns. Its reliable operation, high stability, and reverse breakdown voltage characteristics make it ideal for applications such as voltage regulation, test and measurement devices, and surge protection.

The specific data is subject to PDF, and the above content is for reference