JANTX1N5543CUR-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

The JANTX1N5543CUR-1 is a 300 mW, Zener diode with a maximum Zener voltage of 5.6 volts. It features low capacitance of 11 pF at 1 volt and 8 pF at 5.6 volts with a typical temperature coefficient of 0.03 percent per degree Celsius. This diode has a very low leakage current of 0.15 uA at 5.6 volts and an insulation resistance of greater than 1000 Meg ohm.

Application Field

The JANTX1N5543CUR-1 is typically used as a voltage reference in various applications. It can be used to generate precise emf levels which are used to accurately measure voltage levels in analog and digital circuits. It can also be used in combination with other voltage references to provide additional circuit protection. The JANTX1N5543CUR-1 can be used in radio frequency (RF) applications such as TV/VCR tuners and in audio applications as volume controls. It is also used in battery operated applications because of its low power consumption.

Working Principle

The JANTX1N5543CUR-1 operates on the principle of a Zener diode. A Zener diode works similar to a normal diode, with the addition of a controlled breakdown voltage in the reverse direction of operation. When a Zener diode is operated in the reverse direction at a voltage greater than the Zener voltage, a large amount of current will flow in the reverse direction. This large current can be used to regulate voltage in a system.

The JANTX1N5543CUR-1 uses a reversed biased connection with a Zener voltage of 5.6 V and a low breakdown voltage. This Zener voltage is determined by the amount of dopant atoms in the semiconductor junction. The Zener current is determined by the amount of voltage applied across the junction. The Zener coefficient of the diode is the voltage change divided by the change in current.

The JANTX1N5543CUR-1 can be used to regulate an output voltage and current in an AC or DC circuit. In an AC circuit, the diode can be connected to a choke inductor and an AC voltage source and will act as a voltage regulator to keep the output voltage constant. In a DC circuit, the diode can be connected to a capacitive filter and a DC voltage source. This will act as a voltage regulator to keep the output voltage in the desired range.

The JANTX1N5543CUR-1 can also be used as a voltage clamp in circuits. The diode can be connected in series with a load and a voltage source and can act as a voltage clamp to clamp any voltage spikes above the Zener voltage of the diode.

This diode can be used in various power conditioning applications such as: switching power supplies, DC-DC converters, linear power supplies, flyback converters and other converters. It can also be used in various analog applications such as: video processing, data converters, oscillators, radio receivers and audio amplifiers.

The specific data is subject to PDF, and the above content is for reference