JANTXV1N4618-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices that make use of the flow of electrons to either block or pass through an electrical signal. Zener diodes are a specific type of diode which allow the passage of current in both directions, but only have low resistance when the voltage applied is in one direction, and high resistance when the voltage is reversed. A single Zener diode is a diodes with a single junction, whereas a dual Zener diode is a diode with two parallel junctions, and a triple Zener diode is a diode with three junctions.

JANTXV1N4618-1 is a single Zener diode from Jantx Electronics, which is a renowned manufacturer of semiconductor devices. Its maximum working voltage is 46.2V, with a Zener voltage of 36V, and it is designed to handle up to 1.0A of reverse current. It has a power dissipation of 500mW, and a capacitance of 6.8pF. It is made of silicon material and has a total length of 5.08mm.

JANTXV1N4618-1 is mainly used in noise suppression and voltage stabilization circuits, and is particularly suitable for applications requiring high voltage with relatively low reverse leakage current. In noise suppression circuits, the diode helps reduce high frequency noise. It can also be used in voltage regulation circuits, where it helps to maintain a fixed voltage level even if the input voltage varies. The Zener breakdown voltage determines the voltage output level in such circuits.

A typical circuit diagram with JANTXV1N4618-1 used as a noise suppression or voltage regulation device is shown below. In this circuit, a series connection of two resistors, R1 and R2 is connected between the power source and the output. The diode is connected in parallel with the two resistors, with the cathode connected to ground. When the input voltage is higher than the breakdown voltage of the diode, the diode will start to conduct. This reduces the total resistance of the circuit, and thus allows the output voltage to increase. When the input voltage is lower than the Zener voltage, the diode will stop conducting and the circuit will have high resistance, keeping the output voltage low.

In conclusion, JANTXV1N4618-1 is a single Zener diode from Jantx Electronics designed for noise suppression or voltage regulation applications. It works by becoming a low resistance element when a voltage higher than its Zener voltage is applied to it. This reduction of resistance in the circuit results in an increase of output voltage. Meanwhile, when the input voltage is lower than the breakdown voltage, the diode will become a high resistance element and the output voltage will be low.

The specific data is subject to PDF, and the above content is for reference