JANTXV2N2324AU4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs is an electronic switching device that has unidirectional current flow and is generally manufactured with either silicon or selenium. They are also known as Controlled Rectifiers because under some conditions, they function like a regular rectifier with a positive voltage applied to the anode and controlling the current flow to the cathode. The JANTXV2N2324AU4 is one such SCR.

The JANTXV2N2324AU4 is designed to control the voltage and current in AC and DC circuits and has a low turn-on voltage of 2.5V. It offers a current rating of 8A, a voltage rating of 1200V, and a surge withstand of 150A. It is a ruggedized device, capable of withstanding high temperatures, vibration and power stress cycles.

The main application of the JANTXV2N2324AU4 are found in high-current and high-voltage applications such as AC and DC lighting systems, motor control, railway traction, welding, power supplies, and other industrial applications. The JANTXV2N2324AU4 is capable of operating in temperatures ranging from -40 to 135 degrees Celsius and has a rated lifetime of 100,000 hours.

The principle of operation for the JANTXV2N2324AU4 is that when the appropriate voltage is applied to its anode, an avalanche of minority carriers follows, switching the device from its off state to its on state. This allows current to flow from the anode to the cathode, which in turn supplies the load with power. The anode has to be connected to the positive voltage and the cathode has to be connected to ground for proper operation of the device.

The JANTXV2N2324AU4 can be used in both AC and DC circuits. For AC circuits, the device must be connected in series with a terminal that carries power and a capacitor or a resistor at the other end. When the voltage passes through the diode, it is switched to its on state and the current flows. This allows the load to be powered up and the unwanted current to be sent to the resistor or capacitor.

For DC circuits, the JANTXV2N2324AU4 is connected to a controlled voltage source, such as a voltage regulator, and a resistor or capacitor at the other end. When the voltage is applied, the device is switched to its on state, allowing the current to flow from the source to the load. The resistor or capacitor helps to regulate the current through the circuit and prevent any over-voltage or over-current.

The JANTXV2N2324AU4 is a thyristor-type SCR and can be used in a variety of applications to regulate the voltage and current of AC and DC circuits. It offers a reliable and rugged design, capable of withstanding vibrations and surges, and is designed to operate in temperatures ranging from -40 to 135 degrees Celsius. It is also capable of providing up to 8A of current, a surge withstand current of 150A and a low turn-on voltage of 2.5V.

The specific data is subject to PDF, and the above content is for reference