JANTXV2N2920U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JANTXV2N2920U can be classified as a bipolar junction transistor (BJT) array, and is used for various applications including switching, signal amplification, and detection. It is a triple-diffused vertical NPN bandgap mesa array with a maximum collector-emitter saturation voltage of 25V. In operation, the JANTXV2N2920U has two differently-sized transistors, which results in the left-most transistor having a higher current gain than the center and the right-most transistors. The overall effect is that the JANTXV2N2920U can be used in applications where a wide range of DC current gains are required. For example, it can be used to switch high-current loads from low-current sources. The main purpose of the JANTXV2N2920U is to provide a total of three switching lights that can be used for autonomous control such as for lighting systems, car door systems, and many others. It works by using current gain to amplify a signal and switch the light accordingly. Specifically, it consists of a three-terminal collector contact that is connected to the power source or ground and two base contacts connected to the signal source. The JANTXV2N2920U works through the physical principle of a transistor array, which consists of two or more electrically equivalent devices connected together. This allows each device of the array to act independently while still being connected. In the JANTXV2N2920U, the three terminals of the transistor array are connected to various components of the system in order to switch the lights on or off depending on the signal. To better clarify this process, consider a simplified diagram for a light system. The power source (e.g., a battery) is connected to the collector terminal of the JANTXV2N2920U. The signal (e.g., the switch) is then connected to the base contacts of the JANTXV2N2920U. Finally, the load (e.g., the light) is connected to the emitter terminal. The current gain of the JANTXV2N2920U amplifies the signal from the switch and activates the light, as necessary. In short, the JANTXV2N2920U is a transistor array primarily used in lighting systems. It has two differently-sized transistors so that it can be used in applications requiring a wide range of DC current gains. As a result, it provides three independent switching lights which can be used for autonomous control.

The specific data is subject to PDF, and the above content is for reference