KMH50VS472M30X30T2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of energy storage/dissipating electronic component. They are used in a wide range of electronic equipment from telecommunication to automotive applications. The KMH50VS472M30X30T2 is a common type of aluminum electrolytic capacitor used in many different device types. This article will discuss the application field and working principle of the KMH50VS472M30X30T2.

The KMH50VS472M30X30T2 is a radial aluminum electrolytic capacitor. It is constructed with two electrodes, an anode and a cathode, which are separated by an electrolytic, paper separator filled with a liquid, which is referred to as the electrolyte. The KMH50VS472M30X30T2 is typically a through-hole component and has two leads that extend from the end of its housing.

The main feature of aluminum electrolytic capacitors is their high capacitance-to-volume ratio. As a result, it is possible to get a relatively large capacitance without taking up much space. This makes them a great choice for many different types of electronic devices. Another benefit is that aluminum electrolytic capacitors are good at handling large amounts of current. This makes them suitable for a wide variety of applications.

The KMH50VS472M30X30T2 is commonly used in applications that require long-term storage of energy, such as automotive electrical systems. It is also commonly used in power supplies for filtering or smoothing out incoming power, and in switched-mode power supplies. In these applications, the capacitors act as a temporary storage for any sudden increases in voltage or current.

The KMH50VS472M30X30T2 works by storing electrical charge and then releasing it gradually when the voltage or current level drops. This process is known as charging and discharging, and it is what allows the capacitor to help regulate the incoming power.

When a voltage or current source is connected to the capacitor, the electrons from the anode side are attracted to the negative charge that is present in the electrolyte. This results in electrons being drawn to the cathode and the electrolyte becoming an electrolytic conductor. During the charging time, the voltage or current supplied to the anode will be stored in the capacitor.

When the voltage or current supplied to the anode is removed, the capacitor will start to discharge. This is because the electrons that were attracted to the cathode due to the negative charge in the electrolyte will be released back into the circuit. The capacitor will continue to discharge until the voltage or current reaches a stable level.

In summary, the KMH50VS472M30X30T2 is a type of aluminum electrolytic capacitor. It is often used in applications that require long-term storage of energy, such as automotive electrical systems, power supplies, and switched-mode power supplies. The capacitor works by storing electrical charge and then releasing it gradually when the voltage or current levels drop. This process is called charging and discharging and is what allows the capacitor to help regulate the incoming power.

The specific data is subject to PDF, and the above content is for reference