KY25VB332M16X31LL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are electrical components that store, release, and regulate electrical energy. As a kind of capacitor, aluminum electrolytic capacitor is different from other types, such as ceramic capacitor and film capacitor. KY25VB332M16X31LL is an aluminum electrolytic capacitor. This article will explain the application field and working principle of KY25VB332M16X31LL.

KY25VB332M16X31LL is an aluminum electrolytic capacitor which applies the anode with aluminum foil and separator soaked in electrolyte to form an electrolytic capacitor. The anode layer can be made into a large stepped area to increase the capacity of the capacitor. KY25VB332M16X31LL can withstand relatively large current, and its output impedance is low, which can reduce the influence of noise, signal distortion and attenuation even in high frequency circuits, making it suitable for signal filtering, decoupling, bypass, etc.

The working principle of KY25VB332M16X31LL is similar to other aluminum electrolytic capacitors. It usually consists of two condenser membranes, an anode aluminum foil (with an oxide layer as dielectric), a cathode water cut paper (or PPE film), and an electrolyte. The two condenser membranes are folded together with insulation paper in between, and a lead wire is connected to the two polarities for soldering to circuit board.

The arrangement of the anode aluminum foil and cathode water cut paper create a electric field, when electric current go through, charges will accumulate on the anode, which formed a potential difference gradually. The potential difference on the capacitor membrane will increase until its equal to the externally supplied voltage. This is the capacitance of the KY25VB332M16X31LL, and electric charges will accumulate or discharge if the external voltage changes, which regulate the flow of current.

KY25VB332M16X31LL also has other special advantages. For example, its capacitance is very stable with temperature and age, and can withstand higher voltage than other capacitor types, and it also has longer service life with lower loss. All these make KY25VB332M16X31LL suitable for wide range of application fields, such as switching power supply, high-speed and high-frequency communication circuits, DC drive circuit, AC drive switch control circuit, stability control electrical indicator light, etc.

In conclusion, KY25VB332M16X31LL belongs to aluminum electrolytic capacitor, and its application fields include power supply, communications, switching power supply, and circuit stabilization. Its working principle is based on the potential difference between the anode muslin and cathode water cut paper generated by an externally supplied electric current flow.

The specific data is subject to PDF, and the above content is for reference