LD1117S18CTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LD1117S18CTR is a linear voltage regulator integrated circuit, which is a member of the LD1117 series developed by STMicroelectronics, which belong to the PMIC (Power Management IC) family and specifically Voltage Regulators - Linear family. It is recommended for use in the field of voltage regulation.

The LD1117S18CTR device has an adjustable output voltage, with a dropout voltage of 1-1.2V at 1.5A current draw. Typically, the device can provides up to 1.5A of output current and can operate at a maximum input voltage of 20V. It also has several protection features to secure the IC from exceeding the input voltage range as well as from over-temperature situations.

The external components required to use LD1117S18CTR are fairly basic and minimal, typically consisting of just a single capacitor located near the output and a few decoupling capacitors located near the input. The device has an internal formula-based dynamic Impedance Compensation feature which provides significant flexibility in designing the power supply circuit.

To understand the working principle behind the LD1117S18CTR device, it can be broken down into four main blocks: a voltage reference, an error amplifier, a pass element, and a surge protection circuit.

The voltage reference of the device sets the output voltage by providing a stable reference voltage of 1.25V. This reference voltage is then coupled to the error amplifier, the heart of the regulator. The error amplifier helps the device to maintain the output voltage accuracy and allows it to respond quickly to changes in multiple input conditions such as temperature variation, input voltage variation, and load variation. The error amplifier compares the output voltage with the reference voltage, and if the output voltage is lower than the reference, the error amplifier will increase the output current to the pass element, otherwise if the output voltage is higher than the reference voltage, the error amplifier will decrease the output current to the pass element.

The pass element of the LD1117S18CTR is essentially a current source. It is able to regulate a limited amount of current depending on the conditions determined by the error amplifier. The amount of current that can be regulated is known as the peak output current, and in the case of the LD1117S18CTR, the peak output current is 1.5A. The surge protection circuit is responsible for protecting the device from any over voltage or over temperature situations. If any of these conditions exist, the surge protection circuit will shut down the device automatically.

Once all these components are connected and configured properly, the LD1117S18CTR device will function as intended, providing a regulated output voltage at up to 1.5A output current. It can be used in a variety of voltage regulation applications, such as USB charging, battery charging, power supplies, and DC-to-DC converters, among others.

The specific data is subject to PDF, and the above content is for reference