Allicdata Part #: | 296-7139-5-ND |
Manufacturer Part#: |
LF353P |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Texas Instruments |
Short Description: | IC OPAMP JFET 3MHZ 8DIP |
More Detail: | J-FET Amplifier 2 Circuit 8-PDIP |
DataSheet: | LF353P Datasheet/PDF |
Quantity: | 24 |
Current - Input Bias: | 50pA |
Base Part Number: | LF353 |
Supplier Device Package: | 8-PDIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | 0°C ~ 70°C |
Voltage - Supply, Single/Dual (±): | ±3.5 V ~ 18 V |
Current - Supply: | 3.6mA |
Voltage - Input Offset: | 5mV |
Series: | -- |
Gain Bandwidth Product: | 3MHz |
Slew Rate: | 13 V/µs |
Output Type: | -- |
Number of Circuits: | 2 |
Amplifier Type: | J-FET |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LF353P is a dual channel high performance operational amplifier module that is used in a variety of applications including signal conditioning, signal amplification and signal filtering. It also provides a wide range of signal conditioning and signal filtering capabilities. It is also used for instrumentation and signal processing applications. The LF353P works in three main modes of operation, including the single-ended mode, the differential mode and the full-bridge mode.
The single-ended mode is the most basic mode, in which the LF353P takes in a single input signal and amplifies it to a desired voltage level. It then uses this output voltage to drive the load or to be applied to other desired circuits. This mode is used when a single signal needs to be amplified with a low noise level.
In the differential mode, the LF353P takes two input signals and amplifies them to the required output levels. The differential mode is useful in situations where low distortion is required and can also be used for bridge type signal conditioning. This mode allows for better noise immunity and is ideal for applications such as signal processing and instrumentation.
The full-bridge mode is used when the output needs to be isolated from the power source. In this mode the LF353P works as a full-bridge amplifier, with two inputs and two outputs. The inputs are connected in series to form a full-bridge. The input to the full-bridge is then amplified to the desired voltage level and the output of the full-bridge is then used as the output signal. This mode is often used in applications such as active filters and RF-amplifiers.
The LF353P is a wideband operational amplifier. It can amplify signals up to 2.5GHz and is ideal for high-speed applications. It is also able to operate at lower frequencies with very little distortion. This makes it useful in a variety of applications such as signal conditioning, signal amplification, signal processing and instrumentation. The LF353P is also able to operate as a low-noise amplifier as well as a differential amplifier, allowing it to be used in a wide range of applications.
The LF353P is a low-cost, high-performance module. It is designed with a low noise floor and is able to operate in both single-ended and differential modes. It is also able to operate at a wide range of frequencies, making it ideal for a variety of applications. The LF353P is ideal for use in a variety of instrumentation and signal processing applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LF353N/NOPB | Texas Instru... | -- | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF353DRE4 | Texas Instru... | 0.13 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF353DRG4 | Texas Instru... | 0.13 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF353PG4 | Texas Instru... | 0.16 $ | 1000 | IC OPAMP JFET 3MHZ 8DIPJ-... |
LF353DG4 | Texas Instru... | 0.16 $ | 1000 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF356 MWC | Texas Instru... | 0.25 $ | 1000 | IC OP AMP JFET 5MHZ WAFER... |
LF356MX | Texas Instru... | -- | 1000 | IC OPAMP JFET 5MHZ 8SOICJ... |
LF351N | STMicroelect... | 0.0 $ | 1000 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF353DR | Texas Instru... | -- | 23077 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF351DT | STMicroelect... | 0.15 $ | 5000 | IC OPAMP JFET 4MHZ 8SOJ-F... |
LF353DT | STMicroelect... | 0.16 $ | 5000 | IC OPAMP JFET 4MHZ 8SOJ-F... |
LF353MX/NOPB | Texas Instru... | -- | 7500 | IC OPAMP JFET 4MHZ 8SOICJ... |
LF356N/NOPB | Texas Instru... | -- | 6749 | IC OPAMP JFET 5MHZ 8DIPJ-... |
LF353M/NOPB | Texas Instru... | -- | 5497 | IC OPAMP JFET 4MHZ 8SOICJ... |
LF356MX/NOPB | Texas Instru... | -- | 745 | IC OPAMP JFET 5MHZ 8SOICJ... |
LF353P | Texas Instru... | -- | 24 | IC OPAMP JFET 3MHZ 8DIPJ-... |
LF353N | ON Semicondu... | -- | 6912 | IC OPAMP JFET 4MHZ 8DIPJ-... |
LF356M/NOPB | Texas Instru... | -- | 1781 | IC OPAMP JFET 5MHZ 8SOICJ... |
LF35ABDT-TR | STMicroelect... | 0.0 $ | 1000 | IC REG LINEAR 3.5V 500MA ... |
LF351M | ON Semicondu... | 0.0 $ | 1000 | IC OPAMP JFET 4MHZ 8SOPJ-... |
LF351MX | ON Semicondu... | -- | 1000 | IC OPAMP JFET 4MHZ 8SOPJ-... |
LF356N | Texas Instru... | -- | 118 | IC OPAMP JFET 5MHZ 8DIPJ-... |
LF356H/NOPB | Texas Instru... | 6.8 $ | 307 | IC OPAMP JFET 5MHZ TO99-8... |
LF356H | Texas Instru... | -- | 302 | IC OPAMP JFET 5MHZ TO99-8... |
LF353MX | ON Semicondu... | 0.15 $ | 1000 | IC OPAMP JFET 4MHZ 8SOJ-F... |
LF353D | Texas Instru... | -- | 675 | IC OPAMP JFET 3MHZ 8SOICJ... |
LF356M | Texas Instru... | -- | 190 | IC OPAMP JFET 5MHZ 8SOICJ... |
LF353M | Texas Instru... | -- | 28 | IC OPAMP JFET 4MHZ 8SOICJ... |
LF351D | STMicroelect... | -- | 1000 | IC OPAMP JFET 4MHZ 8SOJ-F... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...