LGX2E821MELA45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in today’s electronic components with their high capacity and reliability. The LGX2E821MELA45 is a type of electrolytic capacitor that uses an aluminum-oxide film as the dielectric material. Specifically, this RLX capacitor was designed for use in circuits where load is high and current transients are common. It is also suitable for low profile applications and has good noise reduction performance.

The construction of LGX2E821MELA45 aluminum electrolytic capacitor consists of a container body filled with an electrolyte solution, an anode and a cathode. The cathode is made from aluminum foil which has been treated with an oxide layer and a metal plate that makes contact with the oxide layer. A flat separator made of aluminum oxide paper or plastic is then placed between the anode and the cathode. All of these components are typically encased in a sturdy epoxy container.

As with any other electrolytic capacitor, LGX2E821MELA45 has three main electrical characteristics – capacitance, resistance and leakage current. Capacitance is the ability of the capacitor to store electrical energy, while resistance is the Voltage drop of the capacitor under load. Leakage current is the amount of current that is lost across the capacitor while it is in use. All of these parameters are important when deciding on the capacitor type and total electrical performance in a circuit.

The main applications of LGX2E821MELA45 aluminum electrolytic capacitor include high-frequency switches, voltage multipliers, 3-phase DC/DC converters, high-power converters, automotive and industrial electronics. It is mainly used for power supply design, power converters, power transmission, rectifiers, inverters, switching devices, regulators and automotive electronics. Due to their high current carrying capacity and noise suppression function, they can also be used in other applications such as switching power supplies, power amplifiers and other consumer electronics.

The working principle of LGX2E821MELA45 is based on the basic principles of electrolytic capacitors. The electrical energy stored in an electrolytic capacitor is proportional to the surface area of the anode, the voltage applied and the specific capacitance of the electrolyte solution. The voltage applied across the anode and cathode of the capacitor creates a chemical reaction that causes ions from the electrolyte solution to precipitate onto the anode surface. This forms a layer of permanent dielectric which acts as the medium for the electrical energy to be stored. The capacitance of the electrolytic capacitor is then determined by the ratio of the anode surface area and the electrolyte solution.

In conclusion, the LGX2E821MELA45 aluminum electrolytic capacitor is a reliable and cost effective solution for a wide range of applications. It has a high capacitance-to-weight ratio and good noise reductive performance. The capacitance value and electrical performance are also relatively stable over a wide temperature range. Therefore, the LGX2E821MELA45 aluminum electrolytic capacitor is an ideal choice for those looking for an efficient, low risk and economical power supply solution.

The specific data is subject to PDF, and the above content is for reference