LGY1J152MELA25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in electric circuit, as they are an efficient solution for storing electrical energy. The LGY1J152MELA25 is a popular and widely used aluminum electrolytic capacitor produced by Yueqing Ling Guan Electronic Technology Co. Ltd.

The enclosed cylindrical container of the LGY1J152MELA25 is made of aluminum, with an anodized aluminum outer cover. The body of the capacitor is constructed of a metal oxide film on a high-purity aluminum oxide layer. Inside the container is an electrolyte of ethylene glycol borate, which flows from the anode to the cathode, supplying the current.

The LGY1J152MELA25 is rated for a capacitance of 15μF, at a rated rated of 50V. The capacitance is determined by the total surface area of the aluminum oxide film, which acts as the dielectric. This aluminum oxide film is 250-300 Angstroms thick, and has a unique dielectric strength of 10,000V/μm, which gives the capacitor a high reliability, and is capable of sustaining high ripple currents.

The LGY1J152MELA25 has a wide range of applications, including audio electronics, power supplies and DC power systems, automotive and industrial equipment, high-frequency test equipment, and high-end consumer electronics. The capacitor is able to provide both high-frequency and low-frequency filtering, as well as providing stability in system operation. Its high reliability and long-term performance make it an ideal choice for these applications.

The working principle of the LGY1J152MELA25 is quite simple. When a voltage is applied between its two terminals, the capacitor behaves as an insulating material, preventing the flow of current. In this way, the capacitor creates a potential difference between its two ends, which is capable of storing electrical energy.

The stored energy is then released over time. This is known as "charge leakage," and is the main source of power loss in aluminum electrolytic capacitors. The rate at which the stored energy is released is determined by the frequency of the applied voltage, and the capacitance value of the capacitor.

When a capacitor is charged up, its terminals reach a negative potential. As the charge is released, the capacitor returns to a neutral potential. The rate at which the capacitor voltage changes depends on the applied voltage, and the capacitance value. The rate at which this voltage change occurs is known as the “capacitance dispersion” or “equivalent series resistance (ESR).”

The LGY1J152MELA25 is capable of providing both low-frequency and high-frequency filtering. The low-frequency filter provides a path for low-frequency signals to travel, while the high-frequency filter provides a path for high-frequency signals. This enables the capacitor to filter out any unwanted high-frequency noise, and provides a cleaner signal for use in audio applications.

The LGY1J152MELA25 is an effective and reliable aluminum electrolytic capacitor, and is well-suited to applications requiring a high-performance, reliable capacitance solution. Its high capacitance and reliability make it an ideal choice for applications in audio electronics, power supplies, automotive and industrial equipment, high-frequency test equipment, and consumer electronics.

The specific data is subject to PDF, and the above content is for reference