LKG1C682MESABK

Series:	LKG
Packaging:	Bulk
Part Status:	Active
Capacitance:	6800µF
Tolerance:	±20%
Voltage - Rated:	16V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	1000 Hrs @ 85°C
Operating Temperature:	-40°C ~ 85°C
Polarization:	Polar
Ratings:	--
Applications:	Audio
Ripple Current @ Low Frequency:	2.15A @ 120Hz
Lead Spacing:	0.394" (10.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Height - Seated (Max):	1.063" (27.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can - Snap-In

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors
Aluminum electrolytic capacitors are an important category of capacitors, which are widely used in the field of power sources, power supplies, and electronic control system circuit protection. As one type of aluminum electrolytic capacitors, LKG1C682MESABK can effectively improve the performance of the circuit and facilitate the operation and maintenance of the machine.Structure and characteristics:
The LKG1C682MESABK aluminum electrolytic capacitors is a type of axial lead aluminum electrolytic capacitors, using cylindrical aluminum outer shell and cylindrical casing. It is applicable to 50Hz-400Hz alternating current circuit, voltage 160V and below, small power frequency, and for the DC audio filter with 100V voltage rating. This type of capacitors has high capacity, low dissipation factor, high insulation resistance, low cost and easy assembly. Application field:
LKG1C682MESABK aluminum electrolytic capacitors find applications in AC circuits with frequency less than 400Hz and voltage rating of 160V or less, such as lighting, instruments, communication equipment, electronic equipment, home appliances, AC motor start-up, etc. It’s especially suitable for small power frequency applications.Working principle:
The working principle of the LKG1C682MESABK aluminum electrolytic capacitors is based on the phenomenon of dielectric polarization. When the AC passes through the capacitor at the thin oxide membrane between the anode and the cathode of the capacitor, a large number of positive and negative charges will be generated on the dielectric layer and produce dielectric polarization. On one side, positive charges are formed on the aluminum foil separated from the electrolyte, and negative charges on the surface adsorbed by the electrolyte, and an electric field is formed between the two. In the meantime, a low resistant path between the cathode and the anode is formed, so that electrons are allowed to pass easily.Due to the dielectric property of the oxide film, the alternating current on the capacitor will be attenuated and eventually terminate, and the capacitor will store the electric energy, until the cycle of the alternating current is reversed and the electricity is discharged again. Thus, the voltage is kept relatively stable and the ripple voltage is reduced, which improves the overall performance and stability of the circuit. Conclusion:
The LKG1C682MESABK aluminum electrolytic capacitors are suitable for AC circuits with a frequency less than 400Hz and a voltage rating of 160V or less, such as lighting, instruments, communication equipment, electronic equipment, home appliances, AC motor start-up, etc. It is characterized by high capacity, low dissipation factor, high insulation resistance, low cost and easy assembly. The working principle of the capacitor is based on the phenomenon of dielectric polarization, and it can effectively improve the performance of the circuit and make the operation and maintenance of the machine easier.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description