LKG1J102MESACK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in power electronics and other high-frequency applications. These capacitors are made up of two dielectric layers, with a layer of aluminum foil between them, and electrolyte between the two layers. The capacitors can store energy and use it to increase the voltage of the circuits they are connected to. The LKG1J102MESACK is a common type of aluminum electrolytic capacitor.

Application Field and Working Principle of LKG1J102MESACK Aluminum Electrolytic Capacitor

The LKG1J102MESACK is an aluminum electrolytic capacitor, usually used in high-power applications. This type of capacitor has an opposite orientation between the cathode and anode, which allows for a higher voltage rating than traditional aluminum electrolytic capacitors. The LKG1J102MESACK is rated for a maximum working voltage of 800 VDC. It is used in a wide variety of applications, such as in high frequency switching power supplies and industrial inverters.

The basic principle of operation for aluminum electrolytic capacitors is the same as for other types of capacitors. They store energy in the form of an electrical charge, which is then used to increase or decrease the voltage of a circuit. The main difference for aluminum electrolytic capacitors is the placement of the two layers of the dielectric material - the bottom layer, called the anode, is coated with electrolyte. This allows for a higher voltage rating than other types of capacitors.

In the LKG1J102MESACK, the anode layer is made from aluminum foil, which is then coated with an electrolyte material called "Boron Phosphide". This material is resistant to oxidation, allowing the capacitor to operate safely at high voltages. The cathode layer is made from aluminum. The two layers are then connected by a conductive layer, which forms a path for electrons to move between the two layers.

When electrical current is applied to the LKG1J102MESACK, the electrons move from the anode to the cathode, which causes a buildup of electrical charge. This charge builds up over time, allowing the capacitor to store energy and use it to increase or decrease the voltage of a circuit. The amount of energy that can be stored in the capacitor depends on the size and type of the capacitor.

The LKG1J102MESACKis a reliable and efficient aluminum electrolytic capacitor which is suitable for use in a wide variety of applications. It is commonly used in high-power applications due to its high voltage rating and reliable operation. With proper installation, the LKG1J102MESACK can provide reliable power for many years.

The specific data is subject to PDF, and the above content is for reference