LKG1K821MESACK

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.457" (37.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ Low Frequency:	2.35A @ 120Hz
Applications:	Audio
Ratings:	--
Series:	LKG
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	1000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	80V
Tolerance:	±20%
Capacitance:	820µF
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are one of the most widely used types of capacitors. These capacitors consist of two aluminum foils, with an electrically conductive electrolyte separating them. This electrolyte acts as the dielectric material. One of the aluminum foils is etched to help to increase the surface area of the capacitor, allowing for a higher capacitance per unit volume. Aluminum electrolytic capacitors are used in various low and high power applications requiring higher capacitance.

LKG1K821MESACK Application Field and Working Principle

The LKG1K821MESACK is an aluminum electrolytic capacitor from the KEMET Corporation. It is a 2.4 Volt, radial-leaded, axial-leaded, molded case capacitor with axial-lead termination style. This capacitor has a voltage rating of 2.4VDC, a capacitance of 8200μF, and a ripple current rating of 7.2A maximum. It is designed for use in low voltage, high frequency, high ripple current, and high capacitance applications such as RF amplifiers and power supplies.The LKG1K821MESACK works on the property of dielectric absorption. The two aluminum foils found inside the capacitor are connected to the positive and negative terminals of a voltage source. When a voltage is applied to the capacitor, the electrolyte material is polarized, creating a positive and negative charge on each side of the foil. This polarization causes an electric field to form between the opposing aluminum foils, and thus increases capacitance.

Conclusion

The LKG1K821MESACK aluminum electrolytic capacitor is a high capacitance device designed specifically for use in low voltage, high frequency, high ripple current, and high capacitance applications. This capacitor works on the principle of dielectric absorption, where two aluminum foils are polarized when a voltage is applied to them, thus increasing the capacitance of the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description