LKG1V682MESBAK

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.063" (27.00mm)
Size / Dimension:	1.181" Dia (30.00mm)
Lead Spacing:	0.394" (10.00mm)
Ripple Current @ Low Frequency:	2.6A @ 120Hz
Applications:	Audio
Ratings:	--
Series:	LKG
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	1000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	35V
Tolerance:	±20%
Capacitance:	6800µF
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors: An OverviewAluminum electrolytic capacitors, generally known as \'electrolytic caps\' or \'electrolytics\' for short, are electrical components that are typically used in electronic circuits because they allow electrical current to be maintained over a wide range of frequencies and temperatures. The most commonly used type of capacitor is an aluminum electrolytic capacitor, which is composed of an aluminum oxide film sandwiched inside two metallized aluminum electrodes. These capacitors are widely used for power supplies, telecommunications, and industrial process control applications.An aluminum electrolytic capacitor, also known as an aluminum-colored capacitor, is a type of electrolytic capacitor with a cathode film of an aluminum oxide or another oxide of the same material. This type of capacitor has a large capacitance and a relatively stable behavior when it is subjected to various kinds of temperature, pressure, frequency, and other environmental conditions. It is the most widely used general purpose operating capacitor. On the other hand, a ceramic capacitor is an electrical component with higher capacitance-to-volume ratio and temperature stability than a ceramic capacitor, but with a much lower dielectric absorption than an aluminum electrolytic.The LKG1V682MESBAK is a specific type of aluminum electrolytic capacitor. It is a surface mount, double-sides metallized electrolytic with a 105°C operating temperature. It has a maximum voltage rating of 16V and a capacitance range of 6.8-0.83uF. The LKG1V682MESBAK is ideal for applications that require high-reliability and high-density capacitance such as consumer electronics, telecom equipment, audio amplifiers, automotive audio systems, and motor control equipment.The working principle of an aluminum electrolytic capacitor is relatively simple. When an electric potential is applied to the capacitor, current flows through the electrolyte solution, which consists of an electrolyte and charged ions. These ions move across the liquid junction between the two plates of the capacitor and form an electrochemical double layer that acts as a dielectric between the plates. This layer has an electric charge and acts like a capacitance. This capacitance is proportional to the surface area of the plates and the distance between them. In other words, the amount of capacitance is dependent on the number of ionized particles in the electrolyte and the number of charges that are transferred each time.Aluminum electrolytic capacitors are used for many different applications because of their high-capacitance values and their low inductive losses. They are commonly used in power supplies, audio amplifiers, motor control equipment, telecom equipment, and many other applications. They are efficient because of their low leakage current, long life, and high reliability. Aluminum electrolytic capacitors are both reliable and cost-efficient. However, their performance can vary because of their size and temperature, and they are relatively fragile. Care must be taken to ensure that the capacitors are not damaged or exposed to extreme temperatures or incorrect voltage levels, as this could reduce the performance of the capacitor or cause it to fail completely. In summary, aluminum electrolytic capacitors are an important component in many electronic circuits because of their high capacitance and low inductive losses. The LKG1V682MESBAK is a specific type and is ideal for certain applications that require a high-density capacitance and reliable performance. The working principle of an aluminum electrolytic capacitor is based on an electrochemical double layer that serves as the dielectric. Aluminum electrolytic capacitors are both reliable and cost-efficient, but their performance can vary depending on their size and temperature, so care must be taken when installing the capacitors to ensure optimal performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description