LLG2Z182MELC30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors play an important role in both commercial and industrial applications due to their relatively low cost, small size, and high capacitance. These capacitors make use of two aluminum foils that are separated by an electrolytic solution consisting of specialized chemicals and an organic solvent. The aluminum foils are held together with a layer of paper saturated with the electrolyte solution. The capacitor gets its electrostatic charge by exposing the aluminum layers to direct current, which allows the voltage to build up across the capacitor plates.
The LLG2Z182MELC30 is an electrolytic capacitor from the series LGZ High Capacitance Long Life Type, designed for long-term use and rated for 2000 hours under full load. This capacitor has an 18000μF capacitance and a 50/60Hz operating frequency. It is designed to provide reliable ripple current damping in a wide range of applications, and can be used in both AC and DC circuits.
This capacitor is typically used in power supplies such as those found in computers, TVs, and many other electronic components, for energy storage and power regulation. It can also be used for decoupling and filtering applications, such as high pass and low pass filters; for power factor correction; as well as harmonic suppression. The LLG2Z182MELC30 is also suited for smoothing voltage peaks, pulsed loads, energy-saving circuits, and other applications where high ripple current and good temperature stability are required.
The working principle of the LLG2Z182MELC30 can be extended to all aluminum electrolytic capacitors. When the capacitor is in use, current flows from the positive side of the capacitor (anode) to the negative side (cathode). The capacitance is determined by the amount of capacitance material between the foil plates, the amount of electrolyte, and the dielectric properties of the material between the foils. The aluminum layers store the charge, while the electrolyte solution provides the switching function. Because the aluminum layers are exposed to the electrolyte solution, an electrochemical reaction occurs, resulting in the formation of a thin insulation material between the aluminum layers. This helps to reduce the rate of leakage, and allows the capacitor to hold a charge for longer periods of time.
In conclusion, the LLG2Z182MELC30 is an aluminum electrolytic capacitor that is designed to provide reliable ripple current damping in a wide range of applications including power supplies, filtering, and energy-saving circuits. It has an 18000μF capacitance and a 50/60Hz operating frequency, and is rated for 2000 hours under full load. Its working principle is similar to that of all aluminum electrolytic capacitors, and involves the use of aluminum foils separated by an electrolytic solution, which helps the capacitor to hold a charge for longer periods of time.

The specific data is subject to PDF, and the above content is for reference