LM2830XQMFX/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM2830XQMFX/NOPB is a Fixed Frequency PWM Step-Down Switching Regulator which consists of an inductor, a high side Power MOSFET and low side switch, a built-in power switch, and P-channel current source MOSFET. LM2830XQMFX/NOPB provide adjustable output voltage from 0.8V to 5.5V and can deliver up to 5A of load current. It is designed for high efficiency buck regulators applications. LM2830XQMFX/NOPB provide efficient components eliminate the need for large bulky capacitors on the output and allow stable output regulate even with small output capacitors.

The primary application field of LM2830XQMFX/NOPB is embedded systems, consumer electronics and portable power applications. It is suitable for battery-powered applications which required optimized power efficiency. It also suitable for PoE applications, where low power draw and high power efficiency are required.

When using the LM2830XQMFX/NOPB, it is critical to match the output capacitor with the switching frequency to improve the output performance. The required output capacitor can be determined from the equivalent output of the power supply. The equivalent load impedance should be lower than the equivalent load impedance of the regulator. The output capacitor should have a voltage rating of least twice as much as the output voltage.

The working principle of the LM2830XQMFX/NOPB is based on its buck topology with a built-in power switch, a high side power MOSFET and low side switch. The power MOSFET is activated by the integrated power switch which is driven by PWM signals. This PWM signal is generated from the internal error amplifier which will compare the output voltage and feedback voltage on the REF/FB pin to generate the error signal. The error signal will then drive the current-control PWM circuit to control the on/off time of the power switch. The power switch then activates/deactivates the high side power MOSFET to regulate the output voltage.

The LM2830XQMFX/NOPB provides a high efficiency over wide input and load current range and eliminates the need for large electrolytic capacitors due to its internal current limit circuitry. It also provide fast transient response, adjustable output voltage and current limit protection. The output voltage is adjustable from 0.8V to 5.5V and can deliver up to 5A of load current.

In summary, LM2830XQMFX/NOPB is a Fixed Frequency PWM Step-Down Switching Regulator which provides adjustable output voltage from 0.8V to 5.5V and can deliver up to 5A of load current. It is designed for embedded systems, consumer electronics and portable power applications. The working principle of it is based on its buck topology with a built-in power switch, a high side power MOSFET and low side switch which provide high efficiency over wide input and load current range. It also provide fast transient response, adjustable output voltage and current limit protection.

The specific data is subject to PDF, and the above content is for reference