LM2852XMXAX-1.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuits (PMICs) are one of the most important semiconductors for controlling, monitoring, and regulating the electrical power supply to electronic systems or devices. Among PMICs, Voltage Regulators are used to provide a consistent and reliable voltage level to the system or device. Voltage Regulators can be further divided into DC DC Switching Regulators, where the output voltage is significantly different from the input voltage.

The LM2852XMXAX-1.5 is a typical DC DC Switching Regulator, with a maximum input voltage of 32 V and a maximum output current of 3 A. It can be used to easily and cost-effectively switch between two different nominal voltages, with a switching frequency of 1.6 MHz. The device also has an adjustable voltage limit, allowing it to switch off at a certain voltage level and protect the system or device.

The application field and working principle of the LM2852XMXAX-1.5 is as follows: The LM2852XMXAX-1.5 is mainly used for VRM (Voltage Regulator Module) applications, such as CPUs and GPUs in mobile computing devices and computing systems. Its switching frequency helps keep the electronic system or device from overheating, and its adjustable voltage limit prevents over-voltage conditions. The device can also be used in LED power supplies and battery charger applications.

The LM2852XMXAX-1.5 works on the principle of square wave modulation. It uses a voltage regulating circuit to compare the output voltage with a reference voltage and then adjusts the duty cycle of the switch appropriately. As the duty cycle increases, the output voltage rises with respect to the reference voltage while the duty cycle is reduced when the output voltage is lower than the reference voltage. This control loop ensures that the output voltage remains stable.

Since the device has a switching frequency of 1.6 MHz, it can be used to easily switch between two different voltage levels. The device is also capable of operating in forced continuous mode, which can be activated by controlling the power-on pin levels. The device has an adjustable threshold voltage, which can be set using the external resistor, allowing the device to switch off automatically when a certain voltage limit is reached.

The external capacitor and inductor also play a key role in the working of the LM2852XMXAX-1.5 regulator. The inductor is used to store energy that is used to convert the input voltage to the output voltage according to the duty cycle modulation. The capacitor acts as a filter, removing high-frequency noise and supplying a smooth output voltage. Moreover, the device has an integrated soft-start function, which gradually increases the output voltage when it is turned on.

Overall, the LM2852XMXAX-1.5 is a highly efficient and reliable DC DC Switching Regulator for VRM, LED power supplies, and battery charger applications. It has a maximum input voltage of 32 V, a maximum output current of 3 A, and a switching frequency of 1.6 MHz. Its adjustable voltage limit, external capacitor and inductor, and its soft-start function ensure safe and reliable operation.

The specific data is subject to PDF, and the above content is for reference