LM2907M/NOPB Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM2907M/NOPB is an integrated circuit designed for use as a precision voltage-to-frequency converter or frequency-to-voltage converter, and it belongs to the PMIC (power management integrated circuit) category of components. This IC is especially suitable for low-power and low-voltage applications and has been designed for direct interface with bridges, strain gages, and thermistors. This article will explore the application field and working principles of LM2907M/NOPB.

Application field of LM2907M/NOPB

The LM2907M/NOPB is a 9-pin single-chip V/F (voltage-to-frequency) and F/V (frequency-to-voltage) converter. It connects directly to a full- and half-bridge transducer, as well as to a temperature-sensing device such as a thermistor. This circuit is particularly suitable for industrial process control, motion control, and other low-power and low-voltage applications. The LM2907M/NOPB can be used in applications such as velocity measurements, bridge-type transducer input conditioning, and temperature measurements using a thermistor.

The are several features of the LM2907M/NOPB which makes it suitable for the above applications. It offers a wide input voltage range of 2.2 V to 36 V and a wide frequency range of 0.1 Hz to 50 Hz which makes it appropriate for most applications. This circuit does not require any external components, making it suitable for use in space-restricted applications. Additionally, it has an extremely low power consumption of only 1.8 mW and features a highly linear response over a wide dynamic range.

Working Principle of LM2907M/NOPB

The LM2907M/NOPB is a voltage-to-frequency and frequency-to-voltage integrated circuit. It is designed to convert an input voltage into a proportional frequency, and an input frequency into a proportional voltage. This IC provides highly linear frequency-to-voltage or voltage-to-frequency conversion, allowing it to accurately measure low-power and low-voltage signals.

To measure the input voltage, the LM2907M/NOPB uses a multiplier circuit and an inverting amplifier. The inverting amplifier takes the input signal, amplifies it, and then feeds it to the multiplier circuit. The output of the multiplier circuit is then sent to an internal clock oscillator which produces a frequency proportional to the input voltage. The output frequency is then fed to the output pin of the IC.

To measure the input frequency the LM2907M/NOPB uses an internal counter. The input signal is fed to the counter which counts the frequency and produces a voltage proportional to the input frequency. The output voltage is then sent to the output pin of the IC.

The LM2907M/NOPB also includes several features which make it suitable for low-power and low-voltage applications. Some of these features include a power-down pin which enables the user to reduce the power consumption of the IC to 0.01 μA and an enable pin which enables the IC to switch from voltage-to-frequency or frequency-to-voltage mode. It also features a protected output to prevent shorting of the output to ground or Vcc.

Conclusion

In conclusion, the LM2907M/NOPB is an ideal device for low-power and low-voltage applications. It has a wide input voltage and frequency range, requires no external components, and has a power consumption of only 1.8 mW. This circuit can be used as a precision voltage-to-frequency converter or frequency-to-voltage converter and is suitable for industrial process control, motion control, and temperature measurements using a thermistor. With its low power consumption, highly linear response, and flexibility, the LM2907M/NOPB is an ideal choice for PMIC applications.

The specific data is subject to PDF, and the above content is for reference