LM34919CQTL/NOPB Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC–DC switching regulators are a type of integrated circuit (IC) that can convert one voltage or current level to another. They are commonly used in power supplies, battery chargers, and in desktop, laptop and mobile devices. The LM34919CQTL/NOPB is a high-performance synchronous buck voltage regulator that can deliver up to 2.0A of continuous output current. It operates with input voltages up to 20V. A built-in VCC regulator provides a stable and adjustable output voltage, providing maximum efficiency and minimum output ripple and noise. Additionally, a low-power shutdown mode reduces operation current to less than 1µA.

The LM34919CQTL/NOPB integrates a wide array of functional blocks and features, including cascaded transconductors, current-mode control, a high-side MOSFET gate driver, and a wide input voltage range up to 20V. It offers the flexibility to define the output voltage by programming an external resistor and can be used for a wide range of applications, from low-power to high-current designs. This device also features programmable auto-discharge mode, frequency synchronization with external clock, adjustable switching frequency and output voltage, and cycle-by-cycle current limit.

The LM34919CQTL/NOPB has two distinct parts: the input and the output. The input is the power source, which can be a battery, a wall adapter, or another DC power source. This is the voltage source that will be regulated, that is, its voltage will be reduced or increased as needed. The output is the load, which can be an LED light, a motor, or other electronic device. The device takes the input voltage, regulates it, and outputs the desired voltage and current to the load.

The LM34919CQTL/NOPB uses a synchronous buck architecture, which means that the voltage regulator is able to both step-up and step-down the voltage depending on the load requirements. The circuit operates by switching the output transistors of the device on and off at a high frequency as to achieve the desired output voltage. The switching frequency is usually programmed by an external resistor, however, it can be configured to be synchronized with an external clock. Additionally, since the output transistors switch at high frequencies, the circuit is able to achieve very high power conversion efficiencies—typically upwards of 95%.

The LM34919CQTL/NOPB is a versatile DC–DC switching regulator IC which can be used for a wide range of applications, from low-power to high-current designs. It is capable of efficiently regulating input power to the desired output voltage, with low output ripple and noise, and high power conversion efficiencies. Additionally, the device has several features such as auto-discharge, programmable switching frequency, and synchronization with external clock, which make it suitable for many applications.

The specific data is subject to PDF, and the above content is for reference