LM3674MFX-1.2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM3674MFX-1.2 is a DC-DC switching regulator that provides two outputs, one that is adjustable and one that is fixed at 1.2V. It can be used in a wide range of applications, such as automotive systems, industrial control systems, consumer electronics, medical systems, and others. The LM3674MFX-1.2 is capable of providing up to 4A of load current, and can operate from 4.5V to 12V input voltage range with a minimum dropout of 0.6V. The device is designed to be simple to implement and requires minimal external components, making it an ideal choice for cost-sensitive applications.

The LM3674MFX-1.2 offers several features such as short-circuit protection, under-voltage lockout, over-voltage protection, auto-restart, and thermal shutdown. It also includes an enable pin to enable or disable the regulator, allowing the output to be remotely controlled. The device’s high-frequency operating frequency of 1MHz and low-noise operation make it a good choice for noise-sensitive circuits. The device operates over a wide temperature range and is protected by a -40°C to 105°C junction temperature range.

The LM3674MFX-1.2 is a buck switching regulator, which means it can convert a higher voltage input signal into a lower voltage output signal. The device works by using a pair of transistors to switch the input voltage at a high frequency, allowing for the conversion of the voltage to the desired level. The input voltage is connected to the input of the regulator through a series inductor and is switched on and off at a rate determined by the feedback signal from the output of the regulator. The inductor must be chosen with the correct value as to allow for the desired voltage transformation. The switching frequency can be adjusted by changing the resistor on the pin that is connected to the enable pin. By enabling the enable pin, the internal oscillator will start and the switching frequency will be determined. By disabling the enable pin, the internal oscillator will be disabled and the device will go into a low-power mode.

The output of the regulator is determined by the feedback signal that is sent to the error amplifier. The voltage of the feedback signal is compared to the reference voltage, which is adjustable depending on the application requirements. If the error amplifier detects that the voltage of the feedback signal is lower than the reference voltage, it will cause the output voltage to increase until it reaches the desired level. If the feedback signal is higher than the reference, the output voltage will decrease until it reaches the desired level. This process of adjustment is continuous and ensures that the output voltage is regulated with high accuracy and stability.

The LM3674MFX-1.2 is an ideal choice for cost-sensitive applications where reliability and performance are essential. This device is easy to implement and requires minimal external components, making it a great choice for both commercial and industrial applications. It is designed to have a high switching frequency, low-noise operation, short-circuit protection, under-voltage lockout, over-voltage protection, auto-restart, and thermal shutdown features, making it a reliable and robust solution.

The specific data is subject to PDF, and the above content is for reference