LM555CN/NOPB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM555CN/NOPB is a programmable timer and oscillator found in the clock/timing category, designed for a wide variety of applications. It is a low power device which uses CMOS, making it ideal for timing tasks that require precise pulses, pulses that last for very short periods of time, and control tasks for precise control of power. The LM555CN/NOPB is a highly versatile device and is most commonly used in controlling applications such as motor or robot control, time delay generation, signal generation, and other such applications.

The LM555CN/NOPB is a monofunctional timer/oscillator. It has 16 pins and is 14-pin wide, with a total power dissipation of 4.5 watts. Its operating temperature ranges from -40°C to 85°C, and its supply voltage is 5.5V. It has a minimum operating frequency of 0.3 Hz and a maximum operating frequency of 300 kHz. It also has a 10mV offset voltage, a maximum voltage of 10mV, a maximum current of 10mA, a maximum rise and fall time of 8µs, and a maximum pulse width of 500ms.

The LM555CN/NOPB works by converting an external signal into a shaped pulse. This shaped pulse is then used to control motors, control power supplies, delay signals, and other control related tasks. The external signal can be pulses, a DC signal, or an AC signal. The LM555CN/NOPB is designed to be compatible with CMOS, TTL and other logic families, making it highly versatile and suitable for a variety of applications.

The LM555CN/NOPB consist of two operational amplifiers, a comparator, an oscillator, and a flip-flop. The first operational amplifier is used as an active filter, while the second one is used to provide high gain and to produce an output signal that is proportional to the external signal. The comparator is used to sense the voltage level of the signal, while the oscillator is used to generate the output pulse. The flip-flop is used to synchronize the pulse to the supply voltage. The LM555CN/NOPB also contains two potentiometers. The first one is used to adjust the output pulse duration, while the second is used to adjust the delay before the pulse is generated.

The LM555CN/NOPB can be programmed to generate pulses of different width and duration. This is done by changing the resistance of the two potentiometers. An external resistor and capacitor can also be connected to the device to control the frequency and pulse width. The LM555CN/NOPB can also be used to control AC motors using pulse-width modulation (PWM). The signal can be used to drive an AC motor either at a steady speed, or to provide speed control by varying the duration of the pulse, or the frequency of the signal.

The LM555CN/NOPB is a highly reliable, low power device and is used in many applications including motor or robot control, time delay generation, signal generation, and other such applications. Its low cost and wide availability make it the perfect choice for many engineers and hobbyists.

The specific data is subject to PDF, and the above content is for reference