LPX102M250H7P3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are an incredibly important component for many different types of ideas. They can be found in a variety of products, including those used in digital and analog electronics, large appliances, computers, and more. Most electrolyte capacitors are cylindrical in shape and contain two electrodes – a positively charged anode and a negatively charged cathode – through which an electric current passes. One type of electrolytic capacitor, namely the LPX102M250H7P3, has a wide range of applications and its working principle is explored in this article.

The LPX102M250H7P3 is a miniature capacitor made of aluminum and oxide materials. It is a low inductance-type capacitor, which means it allows for faster and smoother current flow. This type of capacitor, which uses a long and narrow design, has a greater capacity than equivalent-sized capacitors that take on a short and wide form.

The LPX102M250H7P3 is a radial-lead type capacitor, meaning that the two electrical connections, the anode and the cathode, extend from the sides of the capacitor body. This type of capacitor also has a maximum operating temperature of 105C and temperature range of -25C to 105C. The LPX102M250H7P3 has a capacitance value of 250µF and a rated voltage of 35V, making it suitable for signal recovery and filtering, noise suppression, etc.

When using the LPX102M250H7P3, it is important to be aware of its working principles. The capacitor has two metal foils that face each other and are separated by an insulating oxide layer, as shown in the diagram below. When current begins to flow through the capacitor, one of the foils, known as the anode, becomes the terminal for the positive end of the electric circuit. The other foil, the cathode, becomes the terminal for the negative end.

The capacitor stores energy using electrostatic fields. This is because, whenever voltage is applied to the capacitor, the oxide layer between the anode and cathode becomes polarized. The positive charges of the anode are then attracted to the negative charges of the cathode, and the capacitor is charged. This process is reversed when a reverse-bias voltage is applied and the polarized layers become oppositely charged, thus discharging the capacitor.

The LPX102M250H7P3 is used in a wide variety of applications due to its low inductance, efficient current flow, and high capacitance values. It is commonly used in power management, signal conditioning, switch-mode power supplies, and automotive circuits. It is also used for solenoid and motor control, as well as driving relays or transistors. Further applications include the absorption of voltage spikes, radio frequency interference suppression, and eliminating high frequency oscillations.

In conclusion, the LPX102M250H7P3 is a miniature capacitor of the aluminum electrolytic type. It has a capacitance of 250µF and a rated voltage of 35V and is suitable for a wide range of applications. Its working principle is based on the electrostatic fields produced by the capacitor’s noble metal foils and the insulating layer in between. With its efficient current flow and low inductance, the LPX102M250H7P3 is ideal for use in consumer electronics, automotive circuits, power management, and other related applications.

The specific data is subject to PDF, and the above content is for reference