LTC6255CDC#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6255CDC#TRPBF is a Ultralow Noise,Low Power CMOS Operational Amplifier with 10pA of input bias current, 0.2 nV/√ Hz of voltage noise and available in SOT23-5,MSOP-8 and DFN-8, which is suitable on both single and dual supply applications. As it belongs to linear-amplifiers-instrumentation ,OP amps, Buffer amps so it is widely used in those applications, it can be used in variety of battery-power systems and portable applications running from supply voltages of 1.8V-5.5V.

When talking about the amplifier we need to discuss its circuit features. It features rail to-rail inputs and outputs, wide bandwidth from 0.1 Hz to 3.2 MHz with a voltage gain of 56dB, a low supply current of 0.8mA at 5.5V and its wide supply range is 1.8V to 5.5V. The amplifier is also an ideal choice for applications operating with ±1.8V to ±2.5V dual supplies, as the output of the amplifier can swing both sides of the rail up to one of the respective tow supplies.

The LTC6255CDC#TRPBF also includes ESD protection diodes to protected its internal circuitry from static electricity in harsher environments. Internally the device includes a cascode stage to remove the input bias current and reduce the avalanche effect in the signal path, a common source amplifier which has gains up to 116dB.) As it also includes a temperature range of -40°C to 125°C it is appropriate for a wide range of applications and conditions. The LTC6255CDC#TRPBF features a wide supply range making it well-suited for a variety of battery-powered systems.

The working principle of the LTC6255CDC#TRPBF comes from the Common-Source Amplifier (CSA) circuit schematic, which is a single-input, single-output amplifier. Common-Source Amplifiers are designed for applications that require high input impedance and low output impedance, as well as DC accuracy. The amplifier is designed with two JFET transistors (Q1 and Q2) and two resistors, R2 and R3. The signal is applied to the Source of the first transistor (Q1) and a bias voltage is applied to the Gate of both transistors. This bias voltage is generated by the resistors R2 and R3.

The signal applied to the gate of the first transistor Q1 turns the transistor on and allows current to flow. The current flowing through the transistor (Q1) also flows through the resistor R2 which causes a voltage drop across R2. This causes the voltage to increase at the gate of the second transistor (Q2). This voltage increase turns on transistor (Q2) and allows current to flow causing a voltage drop across R3. The voltage at the output of the amplifier is equal to the voltage at the gate of transistor (Q2) minus the voltage drop across R3. This voltage is then amplified and is the output signal of the amplifier.

In summary, the LTC6255CDC#TRPBF belongs to linear-amplifiers-instrumentation ,OP amps, Buffer amps. It has wide bandwidth from 0.1 Hz to 3.2 MHz with a voltage gain of 56dB, a low supply current of 0.8mA at 5.5V and its wide supply range is 1.8V to 5.5V. It can be used in a variety of battery-powered systems, portable applications, and has built-in protection against ESD. Its working principle mainly relies on the Common-Source Amplifier, which is a single-input, single-output amplifier. Finally, its wide temperature range makes it one of the most suitable amplifiers for different applications in various conditions.

The specific data is subject to PDF, and the above content is for reference