LXZ63VB221M10X25LL

Ratings:	--
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.984" (25.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Impedance:	130 mOhms
Ripple Current @ High Frequency:	1.05A @ 100kHz
Ripple Current @ Low Frequency:	525mA @ 120Hz
Applications:	General Purpose
Series:	LXZ
Polarization:	Polar
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	5000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	63V
Tolerance:	±20%
Capacitance:	220µF
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors use an electrolyte of typically either wet or solid chemicals, sandwiched between two aluminum foils. An anode foil covered with an insulating oxide layer and a cathode foil made of pure aluminum form the capacitor dielectric. When voltage is applied across the capacitor, current flows through the electrolytic from anode to cathode. The oxide layer on the anode foil increases the dielectric constant of the capacitor, giving it a higher capacity. The aluminum electrolytic capacitors, commonly abbreviated to E-caps or Al-Caps, are also known as electrolytic capacitors.The LXZ63VB221M10X25LL is one of the aluminum electrolytic capacitors that are used in a variety of applications. It is a radial lead single-layer electrolytic miniature capacitor that is available in five standard sizes and comes with an insulation sleeve. The LXZ63VB221M10X25LL capacitor has a rated working voltage of 63V AC, a maximum ripple current rating of 30mA at an operating temperature of 85°C, and a rated capacitance value of 221μF at a rated frequency of 100KHz. It is a non-polarized device with a positive and negative pin, and it is ideally suited for DC and low-frequency AC applications.The working principle of aluminum electrolytic capacitors is based on the use of the oxide layer formed on the anode foil in order to increase the capacitance of the device. When a voltage is applied across the capacitor, the oxide layer on the anode foil builds up electrostatic charges that polarize and increase the dielectric constant of the capacitor. This increases the capacitor\'s capacitance, allowing it to store more charge. In addition, due to the polarized nature of the oxide layer, the positive and negative charges of the capacitor cannot move across the dielectric, increasing the level of insulation between the plates and reducing the amount of leakage from the capacitor.With its high capacitance rating and low leakage current, the LXZ63VB221M10X25LL aluminum electrolytic capacitors are ideally suited for applications requiring DC/low-frequency AC blocking, smoothing and decoupling. These capacitors can also be used for signal filtering, delaying, and other special applications. In addition, they are capable of handling high levels of current, making them an ideal choice for high-current applications. As with all aluminum electrolytic capacitors, LXZ63VB221M10X25LL capacitors have a limited life-span and must be handled with care in order to avoid damage caused by over-voltage or over-temperature.In conclusion, the use of aluminum electrolytic capacitors in electronic devices is very common due to their high capacitance, low leakage current, and long-term reliability. The LXZ63VB221M10X25LL aluminum electrolytic capacitors are especially suited for high-current applications and low-frequency AC/DC blocking, smoothing, and decoupling, making them an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description