M95160-RCS6TP/S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

M95160-RCS6TP/S is a type of Memory that is commonly used in electronic devices. It is a non-volatile memory that is capable of storing 6kB of data. It is a Serial Peripheral Interface (SPI) device that can be used in a wide variety of applications. This type of memory is typically used in embedded systems such as industrial automation, consumer electronics, automotive, and test and measurement equipment.

The M95160-RCS6TP/S memory has a write capability of up to 8 clock cycles per byte, and a read capability of up to 10 bytes per second. It has a max operating frequency of 10 MHz and can operate at a supply voltage of 2.7 to 3.6 V. The M95160-RCS6TP/S memory is also capable of self-programming. This feature allows the memory to detect when a byte or page has changed and then automatically writes the data to the cell.

The main application of the M95160-RCS6TP/S memory is data logging. This type of memory is typically used in robotic systems and industrial automation for logging data or for storing operating parameters. It can also be used in consumer electronics and automotive applications for storing user configuration data.

The working principle of the M95160-RCS6TP/S memory is based on the serial peripheral bus (SPI) protocol. The SPI protocol is a master-slave communication protocol that allows the master device to periodically transfer data out of the slave device. In the case of the M95160-RCS6TP/S memory, the master device can send a write command as well as read and write data to/from the slave device. The M95160-RCS6TP/S memory is capable of operating in either 1-wire mode or 2-wire mode, depending on the application.

In 1-wire mode, the communication between the master and slave devices is performed on a single data line and all commands and data are transmitted in series. In 2-wire mode, the communication between the master and slave devices is performed on two separate data lines, where the master sends commands and the slave sends data.

The M95160-RCS6TP/S memory is a versatile type of memory that is used in many applications. It is capable of storing 6kB of data, has a write/read capability of up to 8/10 bytes per second, and is capable of self-programming. Its main application is data logging and it uses the SPI protocol for communication between the master and slave devices.

The specific data is subject to PDF, and the above content is for reference