M95512-DRMN3TP/K Integrated Circuits (ICs)

Series:	Automotive, AEC-Q100
Packaging:	Tape & Reel (TR)
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	512Kb (64K x 8)
Clock Frequency:	16MHz
Write Cycle Time - Word, Page:	4ms
Memory Interface:	SPI
Voltage - Supply:	1.8 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SO
Base Part Number:	M95512

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>M95512-DRMN3TP/K is one of the memory products manufactured by STMicroelectronics. It is an 8-Kbit Serial I2C Bus EEPROM containing non-volatile simultaneous write data. This product has been designed for memory applications in a wide range of electronic systems. </p><p>One of the features of M95512-DRMN3TP/K is its wide operating voltage range, from 2.5V to 5.5V. It also has a low operating current of 0.65mA (max). Another feature is its write protect option, which provides protection against inadvertent write cycles that could corrupt data stored in the device. </p><p>The main application of M95512-DRMN3TP/K is a non-volatile memory, as it does not require power or backup batteries for data storage. Such non-volatile memory applications include data loggers and mission critical data systems. It is also suitable for embedded systems, where reliability is a critical factor.</p><p>The working principle of M95512-DRMN3TP/K involves the use of Serial Peripheral Interface (SPI). This type of interface provides high speed communication between the memory and the other components, such as the microcontroller. Data is sent and received using the serial interface. The device interacts with the microcontroller using the three-wire protocol. This protocol requires three signals: a serial clock (SCK), a chip select (CS) and a serial data line (SDI).</p><p>The device is also compatible with the I2C bus protocol. The I2C bus has two wires and can support multiple devices. The serial data line (SDA) is used to send and receive data, while the serial clock line (SCL) is used to synchronize the communication between the various devices. The M95512-DRMN3TP/K can be connected to the I2C bus in either master or slave mode.</p><p>In master mode, the device can be used to initiate communications and send data to the slaves. In slave mode, the device can be used to respond to commands sent by the master device. The device is capable of simultaneous write cycles, which allows faster data transfer. The data rate is up to 400KHz in the standard mode and up to 1MHz in the fast mode.</p><p>The M95512-DRMN3TP/K offers a wide range of features, including high Write/Erase endurance, low power consumption and high data retention. It is suitable for low-cost and low-power applications, as it does not require a backup battery for data retention. It is also resistant to a wide range of environmental conditions, such as temperature, humidity and shock.</p><p>In summary, M95512-DRMN3TP/K is an 8-Kbit Serial I2C Bus EEPROM designed for use in memory applications in a range of electronic systems. It has a wide operating voltage range, low operating current and a write protect option. It is suitable for non-volatile memory applications, such as data loggers and mission critical data systems. It has a Serial Peripheral Interface and is compatible with the I2C bus protocol. It offers high write/erase endurance, low power consumption and high data retention, and is resistant to a wide range of environmental conditions.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description