MAC4DCM-1G

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	4A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	40A @ 60Hz
Current - Gate Trigger (Igt) (Max):	35mA
Current - Hold (Ih) (Max):	35mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-251-3 Short Leads, IPak, TO-251AA
Supplier Device Package:	I-PAK
Base Part Number:	MAC4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs: MAC4DCM-1G application field and working principle

Thyristors are semiconductor devices used in power electronics and motor control applications. TRIACs, or Triode Alternating Current switches, are an important type of Thyristor. A TRIAC can be used to control the voltage and/or current magnitude of an AC waveform. The MAC4DCM-1G is one such TRIAC. This article will discuss the application field and working principle of the MAC4DCM-1G TRIAC.The MAC4DCM-1G is mainly used in lighting control and communication applications. It can switch current up to 1 amp and voltage up to 400 volts. As the MAC4DCM-1G is a low-power TRIAC, it is also used in low-voltage AC/DC switching applications. Furthermore, the MAC4DCM-1G is resistant to voltage transients, making it suitable for use in automotive and industrial applications.The MAC4DCM-1G works by controlling the flow of current in either direction when used with AC signals. When an AC voltage is applied across the TRIAC, its gate electrode creates a depletion zone on the other side of the junction. This zone blocks any current flow in either direction until the voltage of the gate electrode reaches a certain level, at which point the zone is eliminated. This causes current to flow in either direction, depending on the polarity of the gate electrode. The operation of the MAC4DCM-1G is based on the principle of thyristor turn-on and turn-off. For example, when the gate electrode is connected to the anode and a DC voltage is applied, the gate electrode will turn on the TRIAC. The TRIAC will then latch on and remain in the conducting state until the gate voltage is reversed. After it is turned on, current will flow in either direction depending on the gate voltage\'s polarity. The same applies when the gate voltage is disconnected from the anode and the current is zero.The MAC4DCM-1G also has some unique properties compared to standard thyristors such as temperature stability, high surge capability, and low thermal reactance. These properties make it an ideal choice for applications that require a high degree of regulation and responsiveness.In conclusion, the MAC4DCM-1G TRIAC is a device used mainly in lighting control and communication applications. It can switch current up to 1 amp and voltage up to 400 volts, making it suitable for use in automotive and industrial applications. The MAC4DCM-1G works by controlling the flow of current in either direction when used with AC signals, and its unique properties such as temperature stability, high surge capability and low thermal reactance make it an ideal choice for applications that require a high degree of regulation and responsiveness.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description