MALCE75AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TVS diode, shorthand for “Transient Voltage Suppressor” diode, is an electrical device used to protect sensitive electronic components from voltage spikes. TVS diodes are also known as Zener types, avalanche, and transient protection diodes.

One example of a TVS diode is the MALCE75AE3. The MALCE75AE3 is a 75V bi-directional TVS diode with a peak reverse power (PRP) rating of 2.25 W. It has a maximum stand-off voltage of 60V, a breakdown voltage of 75V, and a uni-directional peak pulse current of 190A.

The MALCE75AE3 is commonly used in computer, automotive, and industrial circuit boards, as well as in power supplies. It is mainly used for overvoltage and transient voltage protection, and can protect sensitive circuit components from a variety of sources, such as electrostatic discharge (ESD) and electrical fast transients (EFT).

The working principle of the MALCE75AE3 involves the diode blocking voltages above 75V, but conducting currents below that level. This allows it to absorb energy, in the form of a voltage spike, and dissipate it as heat. The amount of energy that the diode can absorb depends on its PRP rating.

The MALCE75AE3 is a unidirectional TVS diode, meaning that it will only absorb energy when a voltage spike occurs in the forward direction. This makes it ideal for applications where surge protection is required on only one side of the circuit. In addition, it has a very low capacitance, which results in minimal interference with the signal running through the circuit.

The MALCE75AE3 is designed to be mounted directly on a printed circuit board (PCB), allowing it to be easily installed in any application. It is also designed to withstand high temperatures, making it suitable for use in a wide variety of environments.

In summary, the MALCE75AE3 is a unidirectional TVS diode used for overvoltage and transient voltage protection. It can protect sensitive circuits from a variety of sources, and its low capacitance makes it ideal for applications where surge protection is required on only one side of the circuit. It is designed to be mounted directly on a PCB, and is suitable for use in a wide variety of environments.

The specific data is subject to PDF, and the above content is for reference