MAX1401EAI+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX1401EAI+T is a integrated circuit (IC) for data acquisition—Analog to Digital Converters (ADC). Its primary application field is in the data acquisition and acquisition systems. The MAX1401EAI+T provides a range of functions and specifications that make it suitable for a range of applications, from medical and industrial to high-performance mobile and consumer systems.The MAX1401EAI+T IC is based on an enhanced multimode architecture. It is designed to provide the highest possible conversion performance, while allowing for varying applications. This IC incorporates two 16-bit successive approximation ADC (SAR) converters, two 8-bit digital-to-analog converters (DACs), two sample-and-hold amplifiers (SHA)s, and two programmable gain amplifiers (PGA). It also features on-chip temperature compensation, integrated buffering logic and control register, DAC reference buffer, and an independent analog reference buffer.One of the key advantages of the MAX1401EAI+T IC is its low-power operation. The MIC\'s low power consumption allows it to be used in small, battery-operated systems where lower power consumption is desirable (such as wearable medical and consumer devices). The device has a power consumption of typically just 0.48 mW, so it can be used in an ultra-low-power data acquisition system.The MAX1401EAI+T IC has an on-chip analog performance of up to 84 dB SNR and up to 99 dB THD and dc offset. It has an analog acquisition time of typically 0.32μs. The device is designed for adder architectures, and can achieve a single-cycle data acquisition of 16-bit resolution and two 8-bit DACs for a single cycle.The MAX1401EAI+T has a wide range of applications. In test and measurement equipment, it can be used for high-accuracy and low-noise signal processing. It can be used in consumer electronics, including digital audio systems and portable medical equipment. The device is also used in automotive applications, and for system level control and precision measurements.The MAX1401EAI+T is highly reliable and has long-term operational stability. Its operating temperature range is -40°C to +85°C, and its extended temperature range is -55°C to +105°C. The device also incorporates a thermal protection circuit with a shut-down protection limit of +125°C, which guards against device damage during temperature extremes. The device meets the AEC-Q100 automotive functional requirements, and is therefore qualified for use in harsh automotive environments.The MAX1401EAI+T IC\'s working principle is based on a single-cycle SAR ADC. The device samples an input signal at a predetermined time interval and then performs a comparison between the sampled signal and an internal reference voltage. The result of this comparison is converted and stored as a digital number in a register, which is then compared to a reference value to determine the output. This principle is the same for both the 16-bit and 8-bit DACs on the device.The MAX1401EAI+T is a versatile and low-power ADC device that is suitable for a number of data acquisition and processing applications. Its low-power operation combined with its high performance features make it suitable for a range of system-level requirements. Combined with its extended temperature range and on-chip thermal protection, the MAX1401EAI+T is a robust device that is capable of meeting the demanding requirements of harsh operating environments.

The specific data is subject to PDF, and the above content is for reference