MAX14934EAWE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital Isolators are electrical components used to provide electrical isolation without the need of transformers. Isolation is necessary for a variety of reasons, from preventing noise between two circuits to ensuring safety for humans working around the circuit. The MAX14934EAWE+T is a digital isolator that takes isolated digital signals and transforms them into DC voltage levels for TTL/CMOS/LSTTL applications. The operating characteristics of this digital isolator make it suitable for applications that require both isolation and a wide input voltage range.

The main application field of the MAX14934EAWE+T is as an isolated digital isolator for TTL/CMOS/LSTTL applications. It can be used in a number of different systems in order to provide a level of safety and protection. Its features make it suitable for use in different environments, such as industrial and medical applications.

The MAX14934EAWE+T features a wide input voltage range, allowing it to be used with a variety of different base voltages. It also provides a high level of isolation, with a normal maximum isolation voltage of up to 5000 Vrms. This isolator also offers a low power consumption of only 500μA, making it ideal for battery power applications. Additionally, it features an enabling/disabling function that will allow the user to switch between normal operation and power down mode for further power savings.

The working principle of the MAX14934EAWE+T is relatively simple. It consists of two independent circuits, isolated from each other by a medium called dielectric. The two circuits are connected by a metal lead frame. The dielectric between the circuits acts as an electrical barrier, preventing current from crossing from one circuit to the other. A thin film resistor (ThR) is placed in the circuit, across the dielectric, to provide a voltage drop. The voltage drop is used to control the transfer of digital signals between the two circuits.

The first circuit, also known as the primary side, has an input voltage that is applied to it when the circuit is switched on. This input voltage is applied to the thin film resistor R1, and the voltage is used to determine the voltage drop across the resistor. This voltage drop is what is used to control the current transfer from the primary side to the secondary side of the circuit. The current transfer is dependent on the amount of voltage drop, and the amount of current will be determined by the size of the resistor.

The second circuit, also referred to as the secondary side, is designed to accept the voltage drop from the primary side of the circuit. When the MAX14934EAWE+T receives a signal from the primary side, it will modify the voltage drop as needed to pass the data, depending on the size of the resistor. This data will then be converted into DC voltage levels, and passed to the secondary side of the circuit. The secondary side will then use the voltage levels to generate TTL/CMOS/LSTTL logic signals.

The specific data is subject to PDF, and the above content is for reference